Results 61 to 70 of 86
Thread: July 2023 pics and vids thread
-
07-27-2023, 12:17 PM #61
Here are some pictures of exactly what happened. No luck on sourcing the part locally. I bought one on Amazon that will be at my Houston Friday. Got to get it fixed Sunday as we have family coming in town Monday evening for a week on the lake.
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
07-27-2023, 12:30 PM #62
Man as a last resort. Take those screws out and put some large fender washers over the plastic on the outside of the mount and put it back. 3 may hold it in place pertty well. All the force when in use will be pushing into the transom and not pulling away.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
07-27-2023, 12:31 PM #63
Make sure to seal up that hole where the cable goes through no matter what the end fix is.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
07-27-2023, 12:43 PM #64
Well we’ve been on the water every day since Saturday so it may be a nice little break. If it were Sunday and this was the only option I may do that.
The hole where the cable passes through is sealed by a small rubber grommet that compresses between the actuator bracket and the transom.
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
07-27-2023, 08:23 PM #65
Was a weird weather day last Sat ..blue sky and storms all around. Got hit with a rain storm on our way back to the lake side lodge we were staying at.
Sent from my iPad using Tapatalk2021 Moomba Max
-
07-27-2023, 09:41 PM #66
Right after I cleaned the entire boat I decided that would be a perfect time to punch a huge hole.in it for a trash can. Grabbed a hole saw and went at it.
this is the 3d printed trach chute that Chris prints out. Has a matching threaded nut you screw on from the back. This one has a flap on it as well which is nice so it's not just an open hole.
installed in the boat and trash can slid inplace under it.2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
07-28-2023, 08:25 AM #67
Nothing like the feeling of drilling a hole in a perfectly good boat.
Chris is the man for coming up with these gadgets.
Sent from my iPhone using Tapatalk2018 Supra SL400
-
07-29-2023, 10:10 AM #68Senior Member
- Join Date
- Aug 2019
- Posts
- 178
The family is having a blast enjoying the new Mojo. Even though we have been wakesurf for years, my daughter has had no interest. She loved shopping for the new boat and insisted on being the first to surf it and she killed it! We picked up a Landlock too and had fun goofing around with it.
Sent from my SM-S911U using Tapatalk
-
07-29-2023, 10:11 AM #69Senior Member
- Join Date
- Aug 2019
- Posts
- 178
Continued
Sent from my SM-S911U using Tapatalk
-
07-29-2023, 01:22 PM #70
Looking good
Sent from my iPhone using Tapatalk2018 Supra SL400