Results 1 to 7 of 7
  1. #1
    Join Date
    May 2022
    Location
    idaho
    Posts
    129

    Default Impeller tool, skip the zip ties

    3d printed an impeller sleeve, versus doing the zip tie method.

    Look at the indents left from the zip ties on the factory or dealer installer piece

    It lasted a season, so im sure the indents had negligible affect, but either way i thought i would make a tool and skip the zip ties.

    Twist the lubed impeller into the sleeve, slide into pump housing, done.



    Sent from my SM-G998U using Tapatalk
    2022 Mojo - most options selected

    previous: 2007 centurion elite V air warrior

  2. #2
    Join Date
    May 2022
    Location
    idaho
    Posts
    129

    Default

    also, if anyone is wondering what the impeller P/N is its Johnson 09-812B-1 (2022 mojo w/400 raptor)

    the 4 screws that hold the cover on are M5-.8x8mm ... if you want to switch to a thumb screw 10mm is fine.

    https://www.mcmaster.com/92625A309/
    2022 Mojo - most options selected

    previous: 2007 centurion elite V air warrior

  3. #3
    Join Date
    May 2018
    Posts
    4,631

    Default

    How does this ease install? I typically just lube and twist into the pump housing, no zip tie required.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  4. #4
    Join Date
    Feb 2019
    Location
    Tulsa
    Posts
    140

    Default

    You selling these or???


    Sent from my iPhone using Tapatalk
    ‘22 Makai
    '06 Gravity XLV -sold
    https://www.youtube.com/GreaseMonkeyTV

  5. #5
    Join Date
    May 2022
    Location
    idaho
    Posts
    129

    Default

    Quote Originally Posted by BrentC5Z View Post
    You selling these or???


    Sent from my iPhone using Tapatalk
    no, just sharing ideas. i figure anyone who can 3d print can make something close to the same since it is a simple design.

    Quote Originally Posted by larry_arizona View Post
    How does this ease install? I typically just lube and twist into the pump housing, no zip tie required.


    Sent from my iPhone using Tapatalk
    compared to your method, not much of a time saver since you are going thru the same motions, just eliminates the risk of cutting a fin on the edge of the housing, which i assume is a risk or the factory wouldnt have done the zip tie method.
    2022 Mojo - most options selected

    previous: 2007 centurion elite V air warrior

  6. #6
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,246

    Default

    Well , I learned something new today……..my impellers only lasted 3 to 5 years using nothing other than my hands to install for the last 22 years. Maybe now I’ll get 6 to 8 years out of an impeller.
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  7. #7
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,614

    Default

    Nice job on, love the innovation. I've actually never even heard of the zip tie method lol. I with Larry on this one, just some lube and it slides in no problem.
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •