Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    Jan 2022
    Posts
    3

    Default Height of 2022 Makai

    Does anyone know the height of the 2022 Makai with tower up? Trying to figure out if it will fit in my boat dock on lift.

    Thanks

  2. #2
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,012

    Default

    127.5" or 10'-7.5" according to the spec page on the Moomba site.

    Sent from my SM-G781V using Tapatalk
    Last edited by HFarr; 01-16-2022 at 02:42 PM.
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #3
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,012

    Default

    Oops. Sorry that is on the trailer. You said dock lift! My bad

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  4. #4
    Join Date
    Jan 2022
    Posts
    3

    Default

    Yea cant find anything online. I'll probably just call the corporate office to find out. Thanks

  5. #5
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,012

    Default

    I scaled this drawing of my 2021 Makai back in March when I was adjusting the bunks on my lift. It is pretty accurate. Forgot I had it.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  6. #6
    Join Date
    Jan 2022
    Posts
    3

    Default

    perfect thanks

  7. #7
    Join Date
    Jun 2020
    Location
    Reno, NV
    Posts
    631

    Default

    Quote Originally Posted by HFarr View Post
    I scaled this drawing of my 2021 Makai back in March when I was adjusting the bunks on my lift. It is pretty accurate. Forgot I had it.

    Sent from my SM-G781V using Tapatalk
    What CAD product are you using? I need something basic and low cost for my bathroom remodel plans.


    Making my new SA build come true!!!
    2020 SA 450 Wife calls it White Cloud. Said it makes her feel "Classy"
    2017 Sanger V215sx. We call it Viagra because it's the little blue pill that gets everyone up (Sold)

  8. #8
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    6,729

    Default

    Quote Originally Posted by 2in2out View Post
    What CAD product are you using? I need something basic and low cost for my bathroom remodel plans.
    we are in the middle of a remodel on the place we bought. good old pen/paper are working great for our kitchen and bathroom redo. after next saturday house will be down to the drywall in most of it. living in 2 bedrooms and a bathroom has been a challenge especially since the other half works from home...
    '06 Supra Launch 20SSV-gone but never forgotten

  9. #9
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,012

    Default

    I used Autocad.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  10. #10

    Default

    Quote Originally Posted by sandm View Post
    we are in the middle of a remodel on the place we bought. good old pen/paper are working great for our kitchen and bathroom redo. after next saturday house will be down to the drywall in most of it. living in 2 bedrooms and a bathroom has been a challenge especially since the other half works from home...
    Got any pics of the project? What are you looking at for colors, tile, counter tops etc? We are looking to do a few bathrooms this winter.

    Even though I run CAD every day for work I still find myself using graph paper and pencil as well for home projects often. A good designer from a cabinet dealer can be worth their weight in gold and free. The canned software they use is amazingly fast and they know all the little tricks. I had spent hours and hours over several years on a tough kitchen design, the cabinet designer banged it out in an hour or two. It involved 4 little tricks that I wouldn't have thought of.

    Google sketch up is free and I've had my kids play with it.
    th it.


    Sent from my SM-G991U using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •