Is there a guide on replacing the impeller on Raptor 400?

[MJHSupra]

Did mine yesterday. With the puller was a breeze.

I though the difference in the spline design was interesting (running two different ways on the stock impeller vs all the same way). Any thoughts on this or doesn't matter?

Or was it the same originally and got angled during the 70 hours of use?


Attachment 30782

Are you talking about how it looks smashed at the top of your pic?

[dyrmz134]

Are you talking about how it looks smashed at the top of your pic?

Yes, that's the factory one. Bottom is before I put the new one in.

[MJHSupra]

This is the impeller sitting inside the pump. Notice the clearance differences.




Sent from my iPhone using Tapatalk

[HFarr]

That looks normal. Pump housing isn't a perfect circle. And they do tend to stay bent from use. If you let it sit out in a warm place long enough it will probably straighten back out.

Sent from my SM-G781V using Tapatalk

[bobby1110]

here are pics i took from my first time changing mine.
impeller.jpgraw watter impeller.jpg

[dyrmz134]

Thanks folks!

Got the impeller changed, finished up with the vent lines for the new WM rear bags and moved the sensors up. Ready for a water test before the season officially starts.

[HFarr]

Awesome! Let us know how it goes and take pics of the new wave!

Sent from my SM-G781V using Tapatalk