Is there a guide on replacing the impeller on Raptor 400?

[haknslash]

My dealer is wanting to charge me a couple hundred bucks to replace the impeller this spring when I have the boat summerized. Figured now that my 2-year free dealer maintenance incentive is coming to an end I need to start wrenching on the boat myself to save some cash. Just looking for some tips on what all is involved and what part #’s I need to order. TIA

Edit- I may have put this I the wrong forum section. Please feel free to move to the service section.

[larry_arizona]

This is the impeller kit.

REPLACEMENTKITS.COM - Water Pump Impeller Kit Replaces 09-812B-1 Johnson F6B-9 102480501 - https://www.amazon.com/dp/B073PGLJRK...ing=UTF8&psc=1

Not sure on how easy the pump cover access is in the max, it is very easy on Supra’s through the surf locker engine cover.


4 bolts, needle nose pliers to wiggle the old one off the shaft, use grease supplied or WD40 to install and use new gasket.

Two beers and 30 min.


Sent from my iPhone using Tapatalk

[2in2out]

Two beers and 30 min.

I could easily turn that into 6 hrs, 2 broken tools, one lost bolt, and 3 trips to the auto parts store, and a 1/2 bottle of bourbon and a wellness check from law enforcement.

[KnoxMojo]

Buy a $50 impeller puller, makes the job so much easier, about 10 minutes, but take 3 beers so it lasts longer, lol

[JHCMondo]

I agree, impeller puller and it's a 10 to 15 minute easy job. I've done it 4 times already. Dealer wants to do it for $200. I did it in 15 minutes for $45 and i didn't have to tow it in.

Buy a $50 impeller puller, makes the job so much easier, about 10 minutes, but take 3 beers so it lasts longer, lol

[Hayden]

If you don't get the puller, take the faceplate off, smoother some dish soap on it, and then bump it over once. Worked for me and was posted on here a few years back.

[TexTgrTed1]

Any tips on where to order the impeller pulling tool?

Just changed mine for the 1st time Sunday, after a couple of hours, sweating like a madman, speaking in tongues & cutting the hell out of my hand with pliers, finally got my old one out by destroying it with a flathead screwdriver.

[bobby1110]

Anyone got a part number or link for the puller?

[larry_arizona]

I could easily turn that into 6 hrs, 2 broken tools, one lost bolt, and 3 trips to the auto parts store, and a 1/2 bottle of bourbon and a wellness check from law enforcement.

Ha, love it!!!

But seriously, depending on the boat access, it’s a 1.5 on a 10 scale.


Sent from my iPhone using Tapatalk

[2in2out]

Ha, love it!!!

But seriously, depending on the boat access, it’s a 1.5 on a 10 scale.


Sent from my iPhone using Tapatalk

Ask my wife. I have the knack of making the easiest things into ego driven death marches towards professional help. Mechanical and emotional.