Results 31 to 40 of 44
-
06-30-2021, 05:37 PM #31Senior Member
- Join Date
- Sep 2017
- Posts
- 232
i had issues with mine last year...and it almost always coincided with the same time I was pulling the tube more often!
2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
06-30-2021, 05:41 PM #32
Fresh Air Exhaust Group Buy (FAE group buy) Anyone Interested?
I can tell you the new moombas and Supras are super (and equally) thick in transom and have aluminum reinforcements too for all the mounting hardware.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-02-2021, 10:54 AM #33Senior Member
- Join Date
- Jun 2016
- Posts
- 288
-
07-02-2021, 11:19 AM #34
It’s not a uniform thickness, perhaps at the exhaust opening it’s roughly an inch, but the holes for the swim platform brackets and wake plate/tabs etc are reinforced and thicker than an inch.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-10-2021, 11:26 PM #35
I cut my fae down a little bit just to reduce the chance of it cracking. I really don't want to go through replacing that thing again. It was a pita. I cut it about 1 inch below the tab when it is all the way down. That way when crusing at higher speeds with tab at 100% it is not that far in the water. When surfing I never have the tab above 25% and it looks like there is plenty of depth left to keep the exhaust in the prop wash. Hopefully it helps. I also believe that they crack when doing sharp turns at higher speeds or just going higher speeds in general.
Sent from my SM-G960U1 using Tapatalk- Jason
2019 Moomba Max
-
07-11-2021, 10:05 AM #36
My 2021 Makai FAE has a totally different look than yours does.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
07-11-2021, 02:18 PM #37
-
07-11-2021, 06:53 PM #38
Here it is from another view. The plate welded to it is not flat. Looks like it is there to somehow act as a trim tab? Maybe this does help reduce vibration by keeping a slight pressure on it when running through the water.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
07-11-2021, 06:54 PM #39
This is a stock pipe from the build at SC by the way.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
07-12-2021, 02:51 PM #40Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
Consensus on the forum is that the plate/wing is for vibe dampening.
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE