Results 11 to 17 of 17
-
08-16-2020, 08:50 PM #11
Senior Member
- Join Date
- Aug 2013
- Location
- DFW
- Posts
- 857
Looks like it is the plastic fitting in the second picture. It looks as if it was pushed out of the way by the panel and it looks like it is threaded at an angle.
Sent from my iPhone using Tapatalk ProMatt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
08-16-2020, 09:30 PM #12
Senior Member
- Join Date
- Aug 2013
- Location
- MN
- Posts
- 120
I think Woody nailed it!!
Originally Posted by Woody929
Looks like it is the plastic fitting in the second picture. It looks as if it was pushed out of the way by the panel and it looks like it is threaded at an angle.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk2011 Mobius LSV, V2 Tower, 1100lbs regular side,
750lbs goofy, 370lbs ski locker, 750lbs bow,
flow surf (don't use it thanks to suck gate)
-
08-16-2020, 09:39 PM #13
Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Buddy’s malibu had a leak at the exact same spot. Plastic fitting. Junk!
Could replace with brass!
Sent from my iPhone using Tapatalk
-
08-16-2020, 09:40 PM #14
Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
May need the special o2 sensor socket to remove it and get it out of the way to spin in the new fitting though.... Originally Posted by dakota4ce
Sent from my iPhone using Tapatalk
-
08-16-2020, 11:34 PM #15
Member
- Join Date
- Mar 2020
- Location
- MN
- Posts
- 69
That’s the spot for sure. After crawling around down there I noticed that spot was cracked. �� Originally Posted by Woody929
Looks like it is the plastic fitting in the second picture. It looks as if it was pushed out of the way by the panel and it looks like it is threaded at an angle.
Sent from my iPhone using Tapatalk Pro
2021 Supra SA 400
2018 Moomba Max - Wakemakers upgrade ballast kit (Sold)
2005 Four Winns 170 Horizon (Sold)
-
08-19-2020, 12:22 PM #16
Member
- Join Date
- Mar 2020
- Location
- MN
- Posts
- 69
Got the boat back from the dealer yesterday all fixed up and ready to hit the lake today!! I am going to have to do something for bracing the divider panel. Thanks for all the replies!
2021 Supra SA 400
2018 Moomba Max - Wakemakers upgrade ballast kit (Sold)
2005 Four Winns 170 Horizon (Sold)
-
08-19-2020, 12:43 PM #17
Junior Member
- Join Date
- Aug 2020
- Posts
- 1
I also see the same.
Reply With Quote