Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2020
    Location
    MN
    Posts
    67

    Default Air Bubbles in Non-skid snap-in flooring (2018 Moomba Max)???

    Hi everyone,
    Has anyone experienced air bubbles forming in their non-skid snap in flooring. We recently purchased a 2018 Moomba Max and our flooring started to form pockets of air in random spots and it feels like walking on bubble wrap. Has anyone experienced this type of issue and was what your fix?

    Thanks!

    2021 Supra SA 400
    2018 Moomba Max - Wakemakers upgrade ballast kit (Sold)
    2005 Four Winns 170 Horizon (Sold)

  2. #2
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Get a razor blade, poke a tiny hole and squeeze the bubble out.

    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  3. #3
    Join Date
    Mar 2020
    Location
    MN
    Posts
    67

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Get a razor blade, poke a tiny hole and squeeze the bubble out. hitting

    Sent from my Note 9 using Tapatalk
    That's what I was thinking of doing or hitting them with a sharp pin. Just not sure if that will lead to more problems.
    Thanks

    2021 Supra SA 400
    2018 Moomba Max - Wakemakers upgrade ballast kit (Sold)
    2005 Four Winns 170 Horizon (Sold)

  4. #4
    Join Date
    Feb 2018
    Location
    Boating on Lake Martin, AL
    Posts
    1,540

    Default

    I had one small one form on the gatorstep on top of the dash but it went away on its own. I was going to do as suggested above and poke a very small hole in the middle but it was gone by the next time I got the boat out of storage.
    2019 Moomba Max "MOOMBAE"
    Mods: Wakemakers upgrade + 500 lbs of lead
    2016 Yamaha AR192 - sold

  5. #5
    Join Date
    Sep 2018
    Location
    Eastern Long Island
    Posts
    200

    Default

    It started with air bubbles, then the entire thing just completely separated after less than 2 seasons. I went ahead and spent the $1000 for Gatorstep. I showed Zandar (he's 10) how to install it by doing the first piece around captain's chair and literally left him alone with the rest. He finished in less than an hour. Best upgrade I ever did to a boat.

    https://forum.moomba.com/showthread....Step-Installed
    2018 Moomba Max - 400 Raptor - 6 pump ballast - auto wake 2 - flow 2 - gps zero off

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •