Page 69 of 78 FirstFirst ... 19596768697071 ... LastLast
Results 681 to 690 of 774

Thread: 2021 Mojo

  1. #681
    Join Date
    Dec 2020
    Location
    Boone NC
    Posts
    215

    Default

    Quote Originally Posted by HFarr View Post
    That really does look sharp. I may have to follow your lead on that one.

    Sent from my moto z4 using Tapatalk
    Iíll grab some pics of the inside looking out tomorrow should be out for a night ride at some point this weekend that will be the real test


    Sent from my iPhone using Tapatalk
    Josh
    2021 Mojo, Coming april 2021

  2. #682
    Join Date
    May 2021
    Location
    Granite Bay, California
    Posts
    1

    Default Mojo and bow steps

    Hi guys. I am excited for my Mojo to arrive. It is supposed to spray in June. It will be the popular Pacific Blue similar to the recent posts/builds on this thread. The blue on the interior looks so good!

    My question relates to bow steps. My dealer said they are not an option for the Mojo trailer. Has anyone added bow steps to their boat mate trailer with the Mojo? I would love this option for solo launching.
    2021 Mojo

  3. #683
    Join Date
    Apr 2012
    Posts
    258

    Default

    Quote Originally Posted by Folsom-local View Post
    Hi guys. I am excited for my Mojo to arrive. It is supposed to spray in June. It will be the popular Pacific Blue similar to the recent posts/builds on this thread. The blue on the interior looks so good!

    My question relates to bow steps. My dealer said they are not an option for the Mojo trailer. Has anyone added bow steps to their boat mate trailer with the Mojo? I would love this option for solo launching.
    Someone posted on Facebook, these are the steps they used. https://easystepsystem.com/

    Check the Facebook group if you are on there.

  4. #684
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    209

    Default

    On May 21st. Search for the topic Adding Bow Steps. Lots of information there.

    Sent from my moto z4 using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds Rev 8's, 10's, & sub

  5. #685
    Join Date
    Sep 2020
    Location
    Kansas City
    Posts
    55

    Default

    Pulled the rear bag and did some measurements. It appears the rear bags are 1,250# each and the front would then be 1,500# to make up the 4,000 total.

    Dimensions were 22 high 36 long and 20 wide body and 61 long 20 wide and 9 high on the arm that goes up under the midship subfloor.

    You can add approx 9-10Ē of height if you take out the rear bin and leave a vent hose on the top. I assumed the bag was 24Ē wide earlier when I was hoping for 350-400# per side. However you are only adding 200-250 per side if maxed out every inch of height. These would run you 1,300 with fittings etc, this doesnít seem cost effective to me. You would be better off running lead for the 500#

    If you wanted to just add a small bag on top of the current bag it would gain you 165-175# each side and to me is not worth the cost of $600.

    If you throw another midship bag on top of the floor under the seats you can squeeze an instock 60x20x8 bag in there. However there is a seat support that runs right down the middle of the bag and it is 8.125Ē off the floor on mine so I would want to put some type of foam or rubber guard on it so it didnít cut the bag. By doing that you could add 400# on each side for 159 each bag. Or do a custom bag that is that would add 325-350# it would run 260 each bag but you wouldnít have to worry about the seat support rubbing the bag, or you just donít fill the 8Ē bag completely full.

    Cost wise I think adding the midship bag is the best route as you can add 750-800# for under $400. You could even plumb it in using the top of the rear bag or there are ports on the front of the arms under the subfloor that you can tie into. Downside is you lose that storage when surfing, I currently have 150# of lead there so I already have lost lost some storage there.

    I am a little sad the rear canít get you 350-400# per side but glad the factory used as much space as they did.

    If you instead wanted to do a bag on the floor you could be as cheap as $175 for a bag and pump that would get you the same 800#

  6. #686
    Join Date
    May 2021
    Posts
    11

    Default

    I sent skiers choice an email a couple of months ago regarding the size of the stock bag. Their response was "The standard rear bags for the 2021 Mojo weigh approximately 1350 lbs each. The dimensions are 103"x21.5"x24"." This doesn't make a lot sense since the we know the bags run underneath the seats. They also mentioned if you designed a custom bag and filled the rear locker completely you could get between 250lbs and 300lbs extra on each side.

  7. #687
    Join Date
    May 2021
    Posts
    11

    Default

    1350 lbs equates to 162 gallons of water which required 37,474 cubic inches of volume.

  8. #688
    Join Date
    May 2021
    Posts
    1

    Default

    Quote Originally Posted by Folsom-local View Post
    Hi guys. I am excited for my Mojo to arrive. It is supposed to spray in June. It will be the popular Pacific Blue similar to the recent posts/builds on this thread. The blue on the interior looks so good!

    My question relates to bow steps. My dealer said they are not an option for the Mojo trailer. Has anyone added bow steps to their boat mate trailer with the Mojo? I would love this option for solo launching.
    I was worried about not having the steps but I dropped my truck tailgate and it worked great to step in to the boat.


    Sent from my iPhone using Tapatalk

  9. #689
    Join Date
    Sep 2020
    Location
    Kansas City
    Posts
    55

    Default

    I agree if you donít use a top vent line you could get another 2 inches and you would be close to 300 each side. The cost to me is not worth it. Cheaper to get 600# of lead to throw back there.

  10. #690
    Join Date
    May 2017
    Location
    Alberta, Canada
    Posts
    122

    Default

    Sleek do you have your calcs on a spreadsheet or Google doc you can share? Im just about finished my 10hour burn in and I'll post some vids/pics tomorrow but I feel like there was way more space than 9" when I filled mine.
    2021 Mojo, 6.2L Raptor 400 1.76 trans, OJ 15.5x15, G6, Flow3, +5000 lbs ballast
    2005 Mobius LSV, 310HP 5.7L Carb, ACME 2079, FAE, G3, +3000lbs Ballast, Suckgate (sold)
    Windermere Lake, B.C.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •