Results 1 to 10 of 32
Thread: Water Pump Impeller Removal
-
10-28-2019, 05:31 PM #1
Senior Member
- Join Date
- May 2018
- Location
- Waynesville, Ohio
- Posts
- 323
Water Pump Impeller Removal
Anyone have any good tips to remove the raw water pump impeller? They always seem to pull out hard, but I am really struggling to get it out this year. With all the smart engineers we have in this country you would think they could put a part that needs replace each year in a more accessible spot!
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-28-2019, 05:43 PM #2
Senior Member
- Join Date
- May 2018
- Posts
- 1,703
Water Pump Impeller Removal
If you have cover off, spray impeller with WD40 then take need nose pliers and grab a rubber vane and wiggle it, work your way around in one direction grabbing a vane and wiggling, it eventually pops free
Sent from my iPhone using Tapatalk2018 Supra SA 400
Michigan
-
10-28-2019, 08:48 PM #3
Senior Member
- Join Date
- Apr 2013
- Location
- Knoxville TN
- Posts
- 1,612
WD40 soak. Then bumped the motor a few times. Came right out with needle-nose pliers on my SL.
Yea, weird spot with th a plastic cover back there.
Sent from my P00I using TapatalkLast edited by MJHSupra; 10-28-2019 at 08:54 PM.
2018 Supra SL400
-
10-28-2019, 09:05 PM #4
Senior Member
- Join Date
- Apr 2013
- Location
- Knoxville TN
- Posts
- 1,612
Trick was getting that first 1/4" to move.
Originally Posted by MJHSupra
Sent from my P00I using Tapatalk2018 Supra SL400
-
10-28-2019, 09:06 PM #5
Senior Member
- Join Date
- May 2018
- Location
- Waynesville, Ohio
- Posts
- 323
Good tip. Thank you. I got it out after some cussing and snorting.
. It was really stuck in there this year. I have never had that much trouble getting it out. Maybe I am getting weaker. Ha ha.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-28-2019, 10:30 PM #6
Senior Member
- Join Date
- Oct 2010
- Location
- Lake Wylie NC Area
- Posts
- 2,245
Impeller puller tool.
-
10-28-2019, 10:39 PM #7
Senior Member
- Join Date
- May 2018
- Location
- Waynesville, Ohio
- Posts
- 323
Didn’t even know they made one. Good to know! I am all about having the right tool for the job.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-29-2019, 12:29 AM #8
Senior Member
- Join Date
- Aug 2017
- Posts
- 856
2 paint can openers to pry it out.
2019 Supra SL450
-
10-29-2019, 08:58 AM #9
Senior Member
- Join Date
- Aug 2016
- Posts
- 530
https://www.discountmarinesupplies.c...BoCoYcQAvD_BwE
or you can buy the Jabsco one:
https://marinepumpdirect.com/jabsco-...BoCOP4QAvD_BwE2018 Supra SL550 with 850lbs of lead wake
2017 Supra SA400 (Sold)
2016 Moomba Mojo Surf Edition (Sold)
2017 Ford F250 Super Duty(Sold)
2019 Ford F250 Super Duty
Soulcraft Vodoo
Soulcraft Jordi Pro
Phase Five Matrix
-
10-29-2019, 07:53 PM #10
Senior Member
- Join Date
- Apr 2013
- Location
- Knoxville TN
- Posts
- 1,612
Discount Marine @ $34 to $36 is a good deal. I assumed $100 for the tool.
Sent from my P00I using Tapatalk2018 Supra SL400
Reply With Quote