Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2019
    Location
    Southern WI
    Posts
    11

    Default Ballast Operating Issues

    Hey guys,
    This is my first boat with ballast bags and two of them have issues. The left one I need the most usually will not fill or when it does it's slow. Dealer says it needs a complete overhaul for like $2500, any ideas what I can try on my own first?

    Also, my middle bag in the ski locker just fills on it's own when it's not even on. What could cause that? It seems like it fills whenever another one is on and weird thing is the "on" switch for that one doesnt light up when I actually try it.

    I hope it's cool to be a pain and ask for help on here. I can fix things but dont quite known the entire ballast system and how it works.

    Thx,
    CC

  2. #2
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    What year and model boat?


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  3. #3
    Join Date
    Aug 2019
    Location
    Southern WI
    Posts
    11

    Default

    2006 Mobius LSV, 600 hrs

  4. #4
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    Ok so you have the sprinkler valve system.

    Some of those are probably failing and stuck open or closed. You can easily replace those with new sprinkler valves or convert it to a full reversible pumps system.

    There’s a truckload of posts in here about the sprinkler valance upgrades or conversion.

    Use the search function and look up “sprinkler valve upgrade”.

    Here’s a start:
    https://forum.moomba.com/showthread....on-GIII-system


    Sent from my iPad using Tapatalk
    2017 Moomba Craz

  5. #5
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,086

    Default

    stazi is right. that old irritrol system sucks to say the least. it's over 15 minutes to fill an 1100 if you get into surfing and replace the rear sacks.

    contact MLA on here and he will get you what you need. best advice is to drill 2 new holes in the hull bottom and add dedicated fill/drain pumps to each sack.
    '06 Supra Launch 20SSV-gone but never forgotten

  6. #6
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,209

    Default

    $2500 sounds steep, but they are probably quoting parts and labor. Many have done it at a much lower price if you are a little mech inclined.

    You can buy any new bags from Wakemakers, eBay, FatSac, etc. Forum discounts also - 10%.

    For system, you can go the motorized ball valves or reversible pumps or some hybrid, but dedicated lines and new holes for each bag help.

    The cost factor is are the pumps: aerator vs reversible.

    Bigger lines also help. .75 is stock. They now make 1 and 1.25"

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  7. #7
    Join Date
    Aug 2019
    Location
    Southern WI
    Posts
    11

    Default

    Thanks for all the advice everyone. I'm not too bad with a drill and a wrench. Sounds like I'll be trying to replace the sprinkler valves to finish out the season then decide on my upgrade for next year.

  8. #8
    Join Date
    Dec 2018
    Location
    Phoenix AZ
    Posts
    177

    Default

    I converted mine to the electric ball valve. I think those sprinkler valves restrict flow.


    Sent from my iPhone using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •