Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2017
    Location
    North Carolina
    Posts
    12

    Default Issues with Swim Platform SeaDek

    I have a 2017 Moomba Craz Surf Edition. Last year the edges of the decking on the swim platform started to peel up and it just keeps getting worse. The swim platform is not covered by the boat cover, so it's exposed to the sun most of the time. The boat is kept in a boat house on a lift.

    Is this covered under warranty? Are there suggestions to getting it to stick and then protecting it from peeling up in the future? Or do I just need to call a dealer and see about them fixing it? I just hate to have to pull the platform off and drag it down and lose use of the boat for something like this.

    heath
    2017 Moomba Craz Surf Edition
    High altitude prop
    1140 lb WakeMakers Universal Fit rear ballast upgrade
    Autowake 2.0 firmware upgrade (20171121 version)
    2013 SeaDoo GTI135SE with ski mode
    1984 SeaRay 210 CC - traded

  2. #2
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    888

    Default

    Still covered under warranty....

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf MAX Edition
    Flow 2.0 Surf System w/ AutoWake™
    4,600 Lbs Ballast - Enzos + Lead
    Wet Sounds REV10s + REVO12-XXX

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •