Results 1 to 10 of 18
-
05-29-2019, 12:50 PM #1Junior Member
- Join Date
- May 2019
- Posts
- 1
Best wakesurf setup for a 2019 Craz?
When wakesurfing, what is the best setup for a stock 2019 Moomba Craz? We're beginners looking for a longer sweet spot than what we are currently producing.
-
05-29-2019, 12:58 PM #2
For me I find 11mph to get the best combo of height and length of the pocket.
For goofy foot I get around 10° of pitch and 5° of roll with my surf plate on the port at 65%and then for natural foot, the roll is closer to 3.5° with the starboard plate at 55%
Wake plate at 15% for a crew of 4 or more and 0% is only 2 or 3.
Also if you can have the boat slightly turning AWAY from the rider so you aren’t going totally straight. That really helps shape the wave for my height and curl.
I have 1100’s in the rear lockers and center tank and now bag full.
I also use a 400lb across the rear seat and one on the surf side when I have a small crew of 2 or 3.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-29-2019, 01:27 PM #3
See thread a few topics down too
Sent from my iPhone using Tapatalk--
2019 Craz
-
06-07-2019, 04:07 PM #4
Here are my autowake settings. This produces a great wave with stock ballast. You still need to offset people to the surf side, or add lead wake.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
06-25-2019, 01:10 PM #5
-
06-25-2019, 01:17 PM #6
Yes, when the crew is small is seems to be better with the wakeplate at 0. Remember the wakeplate can clean up the wake, but any amount of deployment WILL diminish the wave size. I prefer to speed up the boat to clean and extend the wave, rather than deploy the wakeplate, so long as the ride is not a beginner and is able to control their speed well, and speed up accordingly.
2017 Moomba Craz
-
06-25-2019, 01:35 PM #7
I will try that out next time. Thanks
2018 Craz, 3000lbs stock ballast, ENZOs, 500lb Lead Ballast, Still chasing the best wave!
-
06-26-2019, 04:25 PM #8
So where exactly are you putting the 500lb lead ballast if you surf normal (port side)?
2019 Moomba Craz - Autowake, 3600lb ballast + 400# lead,OJ 945
2015 Monterey 204FSX sold
-
06-26-2019, 04:26 PM #9
-
06-26-2019, 07:33 PM #10
I have it split evenly side to side. 250# each.
I sit 200 # right in front of the rear bags on both sides. Spread out 2x2 and then 50# behind each leg of the front v-bag.
Sent from my iPhone using Tapatalk2017 Moomba Craz