Hey folks, been a while since I've posted anything, but here is the problem. I took the boat out for the first time of the year a couple weeks ago and noticed that my Temp and depth readings are not working correctly. My water temp reading is -50°F and my depth gauge continuously reads 0.0ft.

I have about a 45 minute drive to the closest dealer, so I am trying to resolve the issue personally before i load her up. I did call the dealer who suggested that I turn the key to the ON position without starting and flip the battery switch off for 30 seconds. After repeating this several times with different time intervals, i haven't had any luck.

If anyone has a clue of how to correct this issue, I would be very appreciative. On a side note, everything else is working just as it should.