Results 1 to 7 of 7
-
04-24-2019, 05:39 PM #1
How to remove Supra digital screen bezel?
Does anyone know how to remove this screen bezel?
I lost a letter and have the replacement but has no screws and no clips, want to verify before messing up the screen.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
04-24-2019, 07:57 PM #2
Does it not just press in with 3m tape back or something? Why would the bezel need to be revived?
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
04-24-2019, 08:06 PM #3
I am thinking tape makes sense, it is billet aluminum.
The “P” and the “R” inserts both have fallen out.
SC covered it under warranty and I didn’t want to take the boat to the dealer assuming it was an easy swap.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
04-24-2019, 08:22 PM #4
I'd use tape or glue before trying to remove the bezel as it doesn't look like it goes the through the back side.
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
04-24-2019, 08:46 PM #5
-
04-24-2019, 08:53 PM #6Junior Member
- Join Date
- Aug 2018
- Posts
- 18
I just removed mine, same thing. 4 Philips screws hold it on, one in each corner from the back side. I removed the black plastic piece that plugs in under the dash, then you can access the screws easier.
Sent from my SM-G965U using Tapatalk
-
04-24-2019, 09:46 PM #7