Results 1 to 4 of 4
Thread: Adjustable DIY Wake Shaper
-
04-03-2019, 11:43 AM #1Junior Member
- Join Date
- Aug 2017
- Posts
- 8
Adjustable DIY Wake Shaper
I am looking into making an adjustable angle DIY shaper. Has anyone made something similar or an adjustable sucks gate for their boat. I have a fixed position suck gate now at about 90 degrees, but am looking to have a bit more versatility to tweak the wake. Does anyone have any suggestions or things they have had success with?
2006 Mobius LSV
GIII + 910s in rear locker, DIY surfgate
-
04-03-2019, 03:50 PM #2
I used a gate and a long toggle bolt with multiple holes to adjust the angle I think I had four settings.
I actually found the best wave to have no angle and just an extension of the hull straight backA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
04-12-2019, 01:47 PM #3
-
04-19-2019, 08:57 PM #4
I have one tucked away somewhere in the garage with roughly 4 settings as well, once I start clearing out the garage for summer I’ll post a picture of it. We always seem to have used it at real close to 90 degree angle but if I remember correctly there were 3-4 other slots that we could adjust it back to.
Sent from my iPhone using Tapatalk