Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Default Spider cracked hull

    I noticed the bottom of my boat is spider cracked when taking it out of the water to clean it. Does this look like it might cause problems or is it minor? 20180915_101620.jpg20180915_101619.jpg20180915_101604.jpg

    Sent from my SM-G955U using Tapatalk
    2017 Moomba Mondo
    1120 rear lockers
    500 center hard tank
    750 ibs
    2-650s in the floor
    Acme 2079 prop

  2. #2
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,050

    Default

    i'm having a hard time figuring out exactly what is going on there. It almost looks like something is growing on the gelcoat. I'm assuming you tried wiping is off?
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

  3. #3

    Default

    It is. Stays in the water sometimes for a month. But the dark lines are the cracks.

    Sent from my SM-G955U using Tapatalk
    2017 Moomba Mondo
    1120 rear lockers
    500 center hard tank
    750 ibs
    2-650s in the floor
    Acme 2079 prop

  4. #4

    Default

    See the grey lines20180915_101604.jpg

    Sent from my SM-G955U using Tapatalk
    2017 Moomba Mondo
    1120 rear lockers
    500 center hard tank
    750 ibs
    2-650s in the floor
    Acme 2079 prop

  5. #5
    Join Date
    Aug 2011
    Posts
    2,332

    Default

    You hit something with the strut.
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  6. #6
    Join Date
    Sep 2018
    Posts
    17

    Default

    I believe the warranty on gel coat is only 1 year. Do you have cracks anywhere else? Generally if there is a problem, it is all over the boat but does not show up until the boat is about 6 months to a year old. At least that has been my experience in the past.
    2009 24' Supra Launch Gravity Games

  7. #7

    Default

    Have them around bow eye. Was there from practically brand new.

    Sent from my SM-G955U using Tapatalk
    2017 Moomba Mondo
    1120 rear lockers
    500 center hard tank
    750 ibs
    2-650s in the floor
    Acme 2079 prop

  8. #8
    Join Date
    Mar 2003
    Location
    s.e. washington state
    Posts
    3,080

    Default

    You have discoloration along the cracks that indicate moisture is getting into the gelcoat. That should be checked out.
    1998 Mobius
    310 HP PCM
    SOLD

  9. #9

    Default

    Ok I will

    Sent from my SM-G955U using Tapatalk
    2017 Moomba Mondo
    1120 rear lockers
    500 center hard tank
    750 ibs
    2-650s in the floor
    Acme 2079 prop

  10. #10
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    248

    Default

    You definitely need to have that checked out. Cracks below the water line will only get worse. They can start to take in water, then expand further, ultimately allowing water to get in the boat. If you hit something, your insurance will cover it. If it is structural, SC will only cover the hull for the original owner, or if it was transferred one time. Just be forewarned, gel coat work is not cheap! At least to have it done correctly. If you donít have the original hull warranty, then hopefully your insurance will cover it. Looks to me like you hit something.


    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •