Results 1 to 5 of 5
Thread: Floor panel removal 06 LSV
-
06-02-2018, 11:53 AM #1Senior Member
- Join Date
- May 2017
- Posts
- 116
Floor panel removal 06 LSV
Hi, trying to take the floor panels out and can't find the fastener head or type? Any info appreciated.
2006 Mobius LSV
New to boating and surfing
-
06-02-2018, 07:13 PM #2
not sure if the 06 is like the 07 but i would think it is. In my 07 LSV there are two metal panels that sit on top of the gas tank and each panel has 4 screws. They can be hard to find because the carpet gets matted down over the screw heads and it doesn't even look like they are there. The first time i took my panels off it took a while to find one or two of them. It just took some time and patience. Try using a magnet if you need. On the rear panel mine are in corners more or less. Same for the front panel but one of them ( the one closest to the drivers seat) is probably 6 inches or so down from the corner. If you can't find them i can take a picture for you.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
06-03-2018, 06:26 PM #3Senior Member
- Join Date
- May 2017
- Posts
- 116
-
06-03-2018, 09:29 PM #4
yea, no fasteners. I actually have left the screws out because they fit so snug and i have had to pull them up from time to time. Makes it a lot easier without dealing with the screws.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
02-14-2019, 01:38 AM #5Junior Member
- Join Date
- Feb 2019
- Posts
- 1
Proper Raised Access Floor Panel Removal and Reinstallation of Raised Computer Floor Panels includes the use of suction cup lifters.