




Thinking about adding RGB lighting to my Max in the off season. What controller do you guys recommend or should I just buy a roll of RGB LEDs from Amazon that come with their own controller?
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
Awesome inspiring mods to those interiors of those boats. I will probably use them myself!
Do you happen to remember what size socket or Allen head I need to remove the pedestal bolts? My boat is in storage but I wanted to head down this weekend to install the new pedestal.
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
On my Helix it was #3 philips pan head screws.
2013 Outback V
2018 Helix sold
2007 Centurion elite sold
Thanks. I guess I’ll just take a lm assortment of tools just in case mine is different.
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
How do I remove this plastic sleeve off the stock pedestal? I need to reuse it on the new adjustable pedestal. I am at the storage unit without a rubber mallet. Any ideas while I’m here?
![]()
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
I could t find one from same seller that was RGB. Wasn't a deal breaker for me though. I only have blue lights in my boat
Sent from my SM-G960U using Tapatalk
So I finished up the stereo install over the weekend pulling some late nights so I could take the boat out last Sunday. Everything worked..... except a major air leak from were the sub box meets the helm wall on the bottom edge. It sounded terrible!
Remember I said I should have cut the hole for the sub a little lower....the box not being able to be pushed upwards enough was keeping it from sealing at the bottom.
To fix I ordered one of these: Atrend Universal MDF Constructed Spacer for 12 Inch Sub Boxes- Adds 3/4" to Decrease Woofer Depth https://www.amazon.com/dp/B0013NWD12..._CMegBbEX0EYEH
and cut a little bit off the top of it so it would make a perfect circle with the hole I cut. Then I drilled 8 small holes and counter sunk 4 short screws in to hold this to the wall, and 4 long screws going through the ring and into the box to hold it in place. Before I had the sub mounting screws going through the helm wall and into the box. Put some silicone around all seams for good measure.
Ignore the god awful hack job hole I cut, thank god it’s hidden lol.
Other than that this thing bumps hard! This system is crazy loud, I couldn’t be happier.
And good lord those rev10s scream with 300watts per speaker!!!
Going up to the in laws lake house this weekend so I’m hoping to finish up round 1 of the rgb LED install tonight or tomorrow night.
Last edited by z28ke; 06-06-2018 at 05:02 PM.
2018 Murder Max
2008 Outback V-Bought new; sold in 2018