Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: 1450ís

  1. #31
    Join Date
    Apr 2018
    Location
    Texas
    Posts
    248

    Default

    Quote Originally Posted by c04rsx-sm View Post
    Finished it today.

    What i ended up doing is...

    Reference the pictures. The stock vent hose has a lot of extra tubing so i cut off about 14 inches and used that to replace the small tube which took the fitting to the motor side connection. And then re clamped the vent line. Pretty easy aside from heating and getting the hose connections done. Which was a pain cramped up in the compartment like that...

    Stock hose for center connection


    Stock vent line


    New connection


    New vent line
    Awesome Iíll just do that thanks


    Sent from my iPhone using Tapatalk
    2015 Mojo
    2005 Yamaha at-230 sold
    2012 Ram 2500 tow rig

  2. #32
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    1,613

    Default 1450ís

    Quote Originally Posted by c04rsx-sm View Post

    Stock hose for center connection
    What is the pump mounted to? Looks like you remove those 4 screws to remove the pump to change the impeller?


    Sent from my iPhone using Tapatalk
    2018 Supra SL400

  3. #33
    Join Date
    Dec 2014
    Location
    Columbus, GA
    Posts
    45

    Default

    Quote Originally Posted by MJHSupra View Post
    What is the pump mounted to? Looks like you remove those 4 screws to remove the pump to change the impeller?


    Sent from my iPhone using Tapatalk
    It is just mounted to an hdpe type plastic board that holds the pump and connections. And yes just 4 bolts and you can move the pump enough to get the impeller out to Change. Might not even need to take the pump off...
    2016 CRAZ
    2008 Mobius LSV -Sold

  4. #34
    Join Date
    May 2020
    Location
    Nashville
    Posts
    50

    Default

    Just picked up a used 2018 mojo that came with enzo's already. Going to do this mini-mod. Thanks for the write up.

  5. #35

    Default

    Quote Originally Posted by flynnva View Post
    I have the exact fit Mojo bags, they are 1270lbs each. With our discount I think they were close to $900 with all new fittings.
    Whatís our discount code for WM??


    Sent from my iPhone using Tapatalk

  6. #36
    Join Date
    May 2020
    Location
    Nashville
    Posts
    50

    Default

    I finally had a chance to complete this and the previous owner had used a t fitting to split the connection for fill/drain on both sides of the bag of the enzos. I moved the vent hose to the location you used. Any issues with splitting the single bottom fill/drain hose into 2?
    2018 Moomba MOJO
    Raptor 400
    ENZO's, Center Tank, IBS
    Surf Prop: OJ 945
    2019 Ford F150 FX4
    5.0L V8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •