Results 1 to 9 of 9
Thread: Bow Step Pads
-
06-04-2017, 03:03 PM #1Senior Member
- Join Date
- May 2017
- Posts
- 171
Bow Step Pads
I've searched the forums and haven't found anything here or on-line. Is this something that has to be custom ordered? It's for a 15 Mojo.
2015 Mojo Surf
-
06-05-2017, 08:26 AM #2
The Mojo Pro comes with them standard. We didn't get the pro but we ordered a full kit from GatorStep which includes the bow steps.
-
06-08-2017, 07:52 AM #3Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
check out gator steps website, they have one available for 35 bucks.
2016 Craz
-
06-08-2017, 09:12 AM #4Senior Member
- Join Date
- May 2017
- Posts
- 171
Where do you see $35? I see $109 for the bow.
2015 Mojo Surf
-
06-08-2017, 09:27 AM #5Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
Just looked at it, yours it a 3 piece setup for the bow on the mojo and is 109. Craz is one piece and only 35 bucks. Still likely worth it, although it is a rip off. I already scratched my bow a little from loading a cooler I believe that may have had some grit on the bottom of it. Killed me to see the scratch in the black gel. I cant get the bow step in soon enough to cover up the scratch!
2016 Craz
-
06-08-2017, 12:13 PM #6Senior Member
- Join Date
- May 2017
- Posts
- 171
-
06-08-2017, 12:25 PM #7
-
06-12-2017, 06:54 PM #8
I bought a couple pieces of non skid from academy sports, they even have little waves in them! One piece fit perfect, the other I trimmed just a bit and put it right below the full piece. Not sure why people don't use the steps that already have traction pads, everyone uses the nose, so I fixed that problem for about $20.
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
06-12-2017, 09:38 PM #9Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
I ordered the bowstep pad from Gatorstep for my Craz. I did the same on my previous boat and it makes loading/unloading so much safer.
Anyone ordered the black stuff like in this Supra? I think it'd look sick in my boat, and from the light research I've done it doesn't seem to be any hotter than gray or tan....just curious if anyone has experience with it?
https://static.wixstatic.com/media/3..._4032_s_2.webpBoatless for now