Results 1 to 3 of 3
-
03-15-2015, 03:39 PM #1Member
- Join Date
- Mar 2014
- Location
- Atlanta, GA
- Posts
- 67
How to Install Old Aerware Remote with Newer Head Ynit
Hey, guys. This is an add on to the thread I started a while back, which is here: https://forum.moomba.com/showthread....-Stereo-Remote. I received the remote from the forum member, and now just need to hook it up. I have 4 wires coming from the remote. Which do I need to hook to the head unit? All of them? I was reading through an old thread (https://forum.moomba.com/showthread....tibility/page3), and it appears I can hook this old remote to the newer head unit, as long as there is the blue/yellow "steering wheel remote" wire( mentioned in the thread), which there is. Which wire ties to this aqua/blue wire? What do I do with the rest?
2003 Moomba Outback LSV
-
03-15-2015, 04:57 PM #2Member
- Join Date
- Mar 2014
- Location
- Atlanta, GA
- Posts
- 67
Sorry for all of the errors in the message. I typed from my phone. Just to clarify, the remote is an Aeware K-55 with red, yellow, blue and black wires. The head unit is a Kenwood KMR-555U. The head unit has a blue/yellow wire for "steering wheel remote".
2003 Moomba Outback LSV
-
08-20-2018, 08:27 AM #3Junior Member
- Join Date
- Aug 2018
- Posts
- 2
Hi supervol0509 - Were you able to get your setup working? I'm trying the exact same combination of remote and head unit.