Results 1 to 10 of 19
Thread: Running engine while on trailer
Hybrid View
-
02-16-2017, 06:00 PM #1Senior Member
- Join Date
- Jan 2011
- Location
- Western PA
- Posts
- 100
The issue I don't like with the Fake a lake/plunger is if you are in the boat and move around, that bounces the trailer. I haven't lost connection with the plunger but went with a setup using a hose connection and ball valve connected to the v drive inside the boat so I can monitor/shut it off.
2017 Moomba Craz
400 Indmar Rapter 6.2L
"X-ceeding Limits"
2004 Supra 22 Launch SSV-crushed by a massive oak tree. RIP 4/1/2023
325 Indmar Assault 320 HP
"One more hour"
-
02-16-2017, 06:45 PM #2Senior Member
- Join Date
- Oct 2013
- Location
- Ft. Collins, CO
- Posts
- 688
I prefer to adapt the garden hose to 1-1/4" hose and attach to the V-drive inlet. There are several examples of those adapters on the forums, you'll just have to search, maybe "winterization" would help. Or just go to the hardware stare and invent it as you shop.
2007 Mobius LSV
1989 Sanger Skier DX - sold