Results 11 to 20 of 41
Hybrid View
-
05-22-2014, 02:51 PM #1
Jeff,
I did not select a font when I ordered mine. You DO need to select the manufacturer logo. That's how they get there additional $30.00. I talked to Seadek on the phone, I had the same question. They told me I did need to select a font when ordering from the selections listed under the Moomba logos. You just need to confirm the dimensions of your platform. I'm getting ready to try mine out for the first time tomorrow.
Hope this helps. Let me know if you have any other questions that I can help with. Seadek was very helpful on the phone.2014 MOJO 345 Surf - Sold
2005 Mobius LSV, carb - Sold
-
05-22-2014, 03:44 PM #2Junior Member
- Join Date
- Sep 2013
- Posts
- 22
Thanks for the info guys. I ended up ordering mine just as you said Badfoot. I went with NO font and selected the Logo for $30. In the notes I stated I wanted the Moomba font from the item photo. Haven't gotten confirmation back on the order, but I hear they are quite busy. I probably should have done this a little earlier.
2007 Moomba Mobius LSV
-
05-23-2014, 02:40 PM #3Junior Member
- Join Date
- Sep 2013
- Posts
- 22
Man, checked that my order was correct (which it was), but they said latest estimate is 6-8 weeks now, not 5 like on the website. Bummer. Probably won't have in time for the Fourth.
2007 Moomba Mobius LSV
-
05-22-2014, 11:33 AM #4
Swim Deck Pad: Is this worth a DIY?
Here is the one I ordered just like that one...
When I ordered mine I found a reference and sent that in. You could use these pictures as your reference. The more references the better you'll be. They will send you a proof that you have to approve before making the pad, just make sure it's what your wanting. Hope that helps.
Sent from my iPhone using Tapatalk1998 Outback
-
05-28-2014, 07:10 PM #5
Swim Deck Pad: Is this worth a DIY?
Ordered mine last week. They said it would be 6-8 weeks. I guess until then, I'll buy some more shit for my boat.
Sent from my iPhone using Tapatalk
-
05-28-2014, 09:25 PM #6
Swim Deck Pad: Is this worth a DIY?
^^^^ addicted haha
Sent from my iPhone using Tapatalk1998 Outback
-
05-28-2014, 09:37 PM #7
Swim Deck Pad: Is this worth a DIY?
[QUOTE=BGeorge01;243305]^^^^ addicted haha
.....I can't stop!
Sent from my iPhone using Tapatalk
-
05-29-2014, 10:09 PM #8Junior Member
- Join Date
- Jan 2014
- Location
- Illinois
- Posts
- 28
Sea dek looks real nice, but do you want to spend $240 and get it after the 4th of July or go with Hydro turf and spend $120 and get it in about 7-10 days. I just redid mine with hydro turf and am very happy with it so far. You have to cut your own but my old pads came off real easy and I was able to use those as my template. Easy job when you have the old rubber pad to cut against. I have enough left over to do my buddy's swim deck too.
-
05-30-2014, 02:39 PM #9
Photos... or it didnt happen
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
06-01-2014, 09:56 PM #10
I just want to say that Paige at Seadek is absolutely clueless. She has not helped at all and has delayed my order. I am absolutely fed up with Seadek.
2007 Moomba Outback V