Results 1 to 8 of 8
Thread: Ballast emptying
Threaded View
-
07-01-2013, 09:20 AM #1
Ballast emptying
So on my Mobius V 2000 i have two hard tanks either side of the engine in the rear, and one ski locker fatsac which i added myself last summer.
I have also added 6 x bags of sand to the bow under the seats, which makes the wake just right.
I am thinking of replacing the fatsac and bags of sand with one or two fatsacs to take up the whole ski locker.
Problem is, the fatsac never really empties, i guess because the fatsac is lower than the pump at the rear of the boat.
I plumbed in to the existing pipework when i set it up, it fills great, but hardly empties.
Is there a standard pump available which actually sucks rather than just pumps water once it makes contact with the impeller? I would like to add the fatsacs in the front, but don't really want lots of weight hanging around all the time in the front.
Any ideas?Dave Longbotham
Minsterworth Waterski Club
River Severn
England
U.K.
Mobius V 2000
[email protected]
www.youtube.com/user/Wolfstone1000