Results 1 to 8 of 8
Thread: Heater install 5 ports!
-
03-30-2013, 06:45 PM #1Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Heater install 5 ports!
Didn't finish the wiring or plumbing yet..
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-06-2013, 02:53 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Heater install 5 ports!
Pulling the floor and running the heater hoses
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-06-2013, 04:06 PM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Heater install 5 ports!
Heater hoses and new ballast hoses and power...
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-06-2013, 07:04 PM #4
Heater install 5 ports!
Did you make or buy a Y fitting to split the ports?
2013 Outback V
-
04-06-2013, 08:29 PM #5Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-07-2013, 07:30 PM #6Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Heater install 5 ports!
Sent from my Nexus 4 using Tapatalk 2
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-07-2013, 07:59 PM #7
-
02-22-2014, 03:02 PM #8
Just have to remember that the tube support goes back a ways so you need to ensure that the clearance is there. You also need to have an appreciation of cutting 4" holes in your boat. That is where the measure twice and cut once comes into effect.
1998 Mobius
310 HP PCM
SOLD