Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default What's wrong in this pic?

    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  2. #2
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    cables broke and a line is tied to it?
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  3. #3
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Yep, hoist cable snapped while I was in it covering the boat. It dropped three feet , scared the crap out of me, sounded like a m80 going off.

    Tied her up for the night after our earlier surf session. Before the cable snap.

    Safe and sound in the am today


    I guess ss can rust




    Off to the dealer for storage, season cut early by 3 weeks, the water is stil 70 degrees, still trunking it.

    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #4
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    cheaper to replace the cable then fiberglass on the boat
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by motosno963 View Post
    cheaper to replace the cable then fiberglass on the boat
    Yep I was lucky it was the main cable and not the leveling cable. The whole cradle dropped directly downand boat stayed within it..
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Time to change all the cabling, maybe ss cable ($$$), how old is the lift?
    Last edited by DOCDRS; 09-23-2012 at 11:01 AM.
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  7. #7
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by DOCDRS View Post
    Time to change all the cabling, maybe ss cable ($$$), how old is the lift?
    Lift is a 2008. Should not happen this early. The one cable showed signs of rust, the other cables don't but good I dea to replace with ss.. The manual says all in water cables are ss, but I find that hard to believe.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  8. #8
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,585

    Default

    Did you have any fraying on the cable. I had a cable snap after 5 years. It had fraying. I had a local hardware store that carried SS cable. Very frustrating, but easy repair.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  9. #9
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Seems to happen wherever there is a bend in the cable with the lifts on our lake.

  10. #10
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by maxpower220 View Post
    Did you have any fraying on the cable. I had a cable snap after 5 years. It had fraying. I had a local hardware store that carried SS cable. Very frustrating, but easy repair.
    No fraying just rusted....
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •