Results 1 to 1 of 1
Thread: Strainer Question ?
-
06-20-2005, 09:37 AM #1Senior Member
- Join Date
- Sep 2002
- Location
- Pennsylvania
- Posts
- 106
Strainer Question ?
I’m going to install a strainer on my Outback LS DD, and have a question about were / how to configure the strainer.
My water pick-up line runs from the under the motor mount into the trans cooler.
I know it should go prior to the trans cooler, but is it installed using straight barbed fittings in and out of the strainer or 90’s?
I saw a picture that someone posted of a v-drive and it looks like it 90’s in and out.
Any help or a picture of a DD setup would great.
Thanks, E
Similar Threads
-
sherwood raw water strainer
By qb12 in forum Moomba ClassifiedsReplies: 0Last Post: 03-03-2008, 10:49 AM -
Raw water strainer.
By JesseC in forum Service & RepairReplies: 13Last Post: 05-19-2007, 11:02 PM -
Is a water strainer really a no brainer?
By Forrest Gump in forum General ChatReplies: 8Last Post: 03-05-2007, 10:38 PM -
Adding a Water strainer?
By AL02REDMOBLSV in forum General ChatReplies: 8Last Post: 12-16-2005, 04:27 PM -
Water Strainer
By smak in forum Service & RepairReplies: 13Last Post: 07-03-2005, 09:57 AM