Results 1 to 3 of 3
Thread: Ignition
Threaded View
-
08-17-2004, 02:28 PM #1Junior Member
- Join Date
- Jul 2004
- Location
- Midland, MI
- Posts
- 13
Ignition
I have a 1992 Boomerang with the 5.8 liter PCM engine. I am having trouble with my engine and was told it is most likely the ignition system. However, the ignition system I need (4 coils mounted on the rear of the engine with some sort of an ECM, and strange non-distributor thing at the front which is a type of crankshaft position sensor but looks more like a hockey puck) is no longer produced, therefore I need to convert to a traditional electronic ignition (distributor, single coil, etc). Is this "obsolete" ignition available anywhere, or can I get the conversion kit directly and install it myself. The PCM dealer is quite pricey for a job that shouldn't be too difficult with parts that are pretty common. Thanks for the help/advice!
Kyle
Similar Threads
-
depthfinder memory lost when ignition off
By mvd in forum Service & RepairReplies: 7Last Post: 04-11-2007, 03:51 PM -
Keyless Ignition
By mattva65 in forum Service & RepairReplies: 0Last Post: 03-28-2006, 07:39 PM -
Dash Switches Control by the ignition
By AZ_Calling in forum General ChatReplies: 4Last Post: 10-12-2005, 07:42 PM -
Ignition left on - burned up coil
By JayG80 in forum Boat OwnersReplies: 0Last Post: 08-24-2003, 04:06 PM -
Keyless Ignition
By dburroug in forum Sales & InformationReplies: 0Last Post: 07-16-2003, 05:23 PM