Search:

Exactly everything seemed to be running but the two pumps were fighting each other in both fill and drain position so nothing was happening


Sent from my iPhone using Tapatalk

Holdmybeer you were right on the money oil ATF coming out of the vent, changed the ATF and now good to go, was also a small leak in the oil filter when I had the oil changed I believe the filter got...

Well sorted it out with a little digging, over the winter had the port ballast control unit replaced as the original one melted (this is a known problem with these boats so if your ballast is acting...

Thanks for that, where is the vent located or is it obvious?


Sent from my iPhone using Tapatalk

Anyone experience red oil in bilge? 2019 Craz about 250 hours was out on a hot weekend with a full crew and full ballast running the boat for a family hard 4-5 hours. Next weekend noticed the bilge...

Thanks all, Pulled the boat and the through hull is clear, must be a plugged line. For now just filling and draining with an external tsunami pump as the boat is in a lake a long way from the...

Through hull is open, thought it may be a plugged line maybe the through hull ball valve isn’t opening properly? Anyone have a trick to clear plugged lines?


Sent from my iPhone using Tapatalk

Hey Gang,
2019 Craz with G6 ballast system.
Having trouble with my port ballast, won’t fill or drain.
Just had the port relay replaced after it melted at the end of last year. Fuses and breakers...