Search:

Actually that’s a separate system altogether. My boat has that sensor bar too. Hooked directly to the hull floor with a ball valve.


Sent from my iPhone using Tapatalk

From about 900 to 1,345 per side in the rear. Close to 5,000 total now. No lead. We are completely satisfied with the wake.


Sent from my iPhone using Tapatalk

Here’s a before photo for comparison. https://uploads.tapatalk-cdn.com/20230606/9523e477aa9af9757eed418d453dd36e.jpg


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20230606/ec78618fd911277b14b42c9d732c8e3d.jpg
Finally, cut whatever extra you have from the long hose at the through hull fitting.
Hose clamp was just draped over...

https://uploads.tapatalk-cdn.com/20230606/eac4cf56840d54b1497891d71b116a78.jpg
When reinstalled, they will look something like this. Connect the bag first, then place everything else off to the side...

https://uploads.tapatalk-cdn.com/20230606/6bee5e4fcf3fc5a720836113fece01ad.jpg
The finished assemblies will look like this.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20230606/2dc136720161569f8d308fab94d5ee2b.jpg
Install the check valve between the end of the short hose and the rest of the long hose that goes to the through hull...

https://uploads.tapatalk-cdn.com/20230606/e8caea1c8f71005bf8ade1d868e60fd4.jpg
Cut the long hose about 14” from the straight fitting that connects to the top of the sensor.
Remove the straight...

It’s frustrating to upgrade the bags only to fight with your boat to fill them.
#1 you will need to upgrade / reinforce your engine panels. Perhaps even the rear access panels.
#2 purchase 2...

This is covered in the video here: https://www.youtube.com/watch?v=61zloWEOCEw

Skip to 4:30 for the cooler / trash can portion.

Cultist for 3/4” MDFhttps://uploads.tapatalk-cdn.com/20230529/9d60b0e803323e10ccc4fee508edef22.jpg


Sent from my iPhone using Tapatalk

We never store anything under this seat since it’s troublesome to get to. This is a 20x20x8 external dim ported enclosure. 1.5x14x6.5 slot port. Nets right at 1 cuft for the sub and is tuned just...

https://uploads.tapatalk-cdn.com/20221123/de4d528e8b2dbda2352edd87e22f693c.jpg
OE filter…


Sent from my iPhone using Tapatalk

You selling these or???


Sent from my iPhone using Tapatalk

I’m fine with them as is really. Certainly would like to upgrade but don’t feel the benefit outweighs the cost.

I would love to upgrade the sub eventually. Maybe add an AS-10 or even an AS-6.
...

Mine pop out of the track every time. Kinda worried about the exhaust manifold heat against them.


Sent from my iPhone using Tapatalk

The new Wetsounds REV 12 HD tower speakers!
https://youtu.be/lurv0ZPO75k


Sent from my iPhone using Tapatalk

Would need another amp to run a pair and honestly don’t know what I’d gain keeping the 10s. We only surf and don’t need much but do want the full range of sound.


Sent from my iPhone using...

Yes the htx 4 bridged. Tuned WAY different for these.


Sent from my iPhone using Tapatalk

These don’t hang as low as the Rev 10s


Sent from my iPhone using Tapatalk

New Rev 12 HDs provide 0.54” more headroom than the previous Rev 10s.
They recessed the mounting surface into the housing.


Sent from my iPhone using Tapatalk

I agree about the Rev 10s. For surfing, I hated them. They came on the the new boat so I was gonna just live with them. Then, these 12s were released. Buddy owns a shop and has 2 pair on his Tige...

https://uploads.tapatalk-cdn.com/20220629/926d284dda46f950580c5074849b0422.jpg
https://uploads.tapatalk-cdn.com/20220629/e50be42eb51e1a349f8b8cae6bb19f7a.jpg


Sent from my iPhone using Tapatalk

I’m amazed at how Wetsounds continues to push the envelope in marine audio. These new 12” tower speakers fill in that mid bass the Rev 10s just don’t generate. Heck, I’ve heard boats that produce...

https://uploads.tapatalk-cdn.com/20220627/2f03d0261c04f665d34901bb2f88b4f3.jpg