Search:

New comp vest.
https://uploads.tapatalk-cdn.com/20201225/704990a1ae1c5cf9afc01d51ae7a77e0.jpg


Sent from my iPhone using Tapatalk

Get 3.0 for surfing


Sent from my iPad using Tapatalk

I used it for my stereo and amps.


Sent from my iPad using Tapatalk

It WILL snap a cable, at worst, but I assure you it will break. I had to upgrade from my 4000lb hoist to a 6600 for my Craz because I broke it after a month or so. Scared the shit out of me when it...

OK, XTP makes the OZ tower


Sent from my iPhone using Tapatalk

Contact Roswell and see if they have them. They made the tower.


Sent from my iPhone using Tapatalk

Straight SAE 50 like the Valvoline VR1 I posted is good to go.

Yes, I’m an industrial lubricant specialist as my line of work

Sent from my iPhone using Tapatalk

Still haven’t got a response from FAE on my second failed exhaust.

Time to blow up their phone I guess.


Sent from my iPhone using Tapatalk

They are Jabsco Ballast Puppy impellers (green) google and search around for the best deal.


Sent from my iPhone using Tapatalk

Yes, common issue with failing sprinkler valves.


Sent from my iPad using Tapatalk

Too small. I have a 6600lb Hewitt for my Craz and I thinks it’s a little low. If you have any lead or people in it when you lift, 5000lb WILL break.


Sent from my iPad using Tapatalk

I can winterize my boat in under 1 hour.


Sent from my iPhone using Tapatalk

Follow the Indmar Engine manual that you were supplied with the boat.


Sent from my iPhone using Tapatalk

Yes, unless already equipped with the under seat bow bag (surf edition came with that) the center fills and then fills up the bow bag.


Sent from my iPhone using Tapatalk

And make sure your wake plate is all the up at 0!

Also for more push you should have the surf plates at 55-60 (natural) for port and 65-70 for starboard (goofy).

If you run those higher it...

The 1190’s go all the way up under the side seats. It’s evident from the pictures of them on there website.

You could put lead under the the bags toward the back of the rear compartments, but...

Get gussets out on around the flange (like my pic) to strengthen the connection.

Otherwise it will crack.


Sent from my iPhone using Tapatalk

That and have better customer service.

First time it failed they were great to respond and repair. This time they basically ignored my emails and I’m hearing I’m not the only one to get the cold...

I have two pro welders around my house. I’ll get one to fix properly, how it should be done!

Also contemplating whether a brace from before the elbow back to the drain might be a better option...

I pulled mine off again on Friday and reinstalled the factory outlet.
I email FAE and got crickets this time. Not impressed. I told them that they need to gusset these or they will continue to...

I tow my Craz with a Grand Cherokee. Granted I rarely tow, and not far, but it’s doable. Before that I had a 1500 Silverado and it wasn’t even an issue over long distances.

Once you start getting...

The thing that has changed is that surfing is becoming the predominant activity for these boats, and weight is king when it comes to surfing. With wakeboarding the weight requirement is generally...

You have the exact same color interior as my Craz!


Sent from my iPhone using Tapatalk

Just pull your pants down when you get up. [emoji38]


Sent from my iPad using Tapatalk

Best I’ve done with full boat is 12.2mph. The push you get and air you can pop is amazing.


Sent from my iPhone using Tapatalk