Activity Stream

I’m not sure I dig the new dash, I like my ‘22 Mojo. I suppose I’d have to see it in person, I’m sure it wouldn’t grow on me. The new Craz does look...

Walters v-drive is 1qt. I also contacted them when I did my first change on my 2013 Mojo because the 0.5qt that was printed was wrong, they also...

I warm mine up, remove the vent and suck the old oil out with a vacuum extractor. Never get it all out so fill is usually a little shy of 1 quart. ...

This is from the manual. Sorry. don’t remember what I put in. It wasn’t very much I remember that. I checked the oil level on the stick ...

No problem. Just so you know you will need a heat gun to get the hose on the fittings. So just make sure you have one before you start your...

Can you verify the Walters capacity (Indmar manual says .5QT, but I'v also come across 1 QT)?

Idk about the 6.2 ford engine. I know nothing about them really. But I am pretty versed in LS/LT. I know for sure like Larry said, I can throw...

That was my original thought since they are the most relevant engine it seems these days. Next boat, I’d prefer to stay GM, but I know it’s...

Can someone help me do this with some pictures? Im an idiot when it comes to fuses, switches, etc. I'm very competent at doing things but again,...

import tuners have been adding sideline ecu's for years and iirc it's how some have gotten around the locked down ecu's of the c8's. would not be...

Hopefully you can utilize an existing heat exchanger/intercooler from a marine LSA application. I would go 1.9l vs 2.3l. Sent from my iPhone...

I assumed you were talking Raptor engines, my apologies, You should have no issue adding a Supercharger on a LS6.0, a 1.9l TVS would be great,...

Thank you sir!

There’s all kinds of places I’m sure I could get one for an LS/LT. I know I can for my 409 6.0 But I’m not too into it with this boat, next for...

O they did. I just never noticed them until a month or so ago when I looked lol. I just got lucky there were on the correct sides. Sent from...

If you can do the wire harness to adapt a tuneable ECM, you could make a bunch of $$$$$ Sent from my iPhone using Tapatalk

I’m sure a ford/gm ecm is a whole lot cheaper than the 450/575 upgrade I’m curious why guys don’t go that route. I know it’s on my list of...

Can’t do it with the Indmar ECM. ECM is locked and you can’t buy the 575 ECM from Indmar. However, I am sure you could put a Ford ECM on it so...

Wowzers. Speaking of options. I’m at the lake on my swim deck right now thinking, anyone ever opted to supercharge their engine on their own?...

they did a nice job on the craz giving it a more "traditional" look. I'm with Ssurfer that the dash looks like a big blob of plastic-have to see it...

Hey sonic, do you think I can install this in the flip up cooler lid on my 242? The cooler is useless, and we pretty much use as a trash can. ...

Interesting…….Check out the video on the Makai Explore page. It is about 30 seconds and says “In Floor Cooler”. Will be interesting to see if it...

Have them do it at your house and only pay once? They do mobile service at my house and fo oil change and everything in one visit.

22 is the sweet spot model year for Mondo. Wireless charging is out of the sun below the throttle or in a cubby above the throttle. I prefer the...

believe it sold as he talked about taking a 100k deposit earlier this week but that said... fully loaded SL including the 550 motor/full jl/thrusters...

I updated it myself last time too. I don't have a trailer so paying 200 to have them pick it up and flash it and bring it back is a hassle.

The new online builder includes no option pricing, that sucks. Sent from my iPhone using Tapatalk

Base price SE 203k SL 186k SA 179k SR 160k Sent from my iPhone using Tapatalk

Where’s he at with that SL. What’s he want for it Sent from my iPhone using Tapatalk

Still says in floor storage and trash can Sent from my iPhone using Tapatalk