Activity Stream

Not sure I've heard peeps upgrading the Ballast Puppy with the Ballast Kings. The 2016 model has three pumps correct? Most boat newer models have...

Went another two weeks without an issue. This morning would mot spark. Fiddled with ignition, tightened battery and checked ground and it started....

Still starting on first turn of the key. It may have been the ground connection the entire time. I am happy with the new plugs, coil and ignition. I...

Ready for next week and weekend. We got a lake house booked for Wed-Sun!

Yea crossing over the wake is always fun times lol!

After 13 rainy weekends we got a 100 degree Monday at the lake. Simply amazing Family day on the water. Love the pic of my daughter's face as we...

Thanks. I will take a look this weekend. I bought the extended warranty on the electronics, so I hope this will be covered if I I can't find it. ...

As @HoldMyBeer said, I've known people that made them for both cars and boats. Clean the area good before you reinstall so once you install it...

The 2 bolt gasket is a standard 5.7L GM 1996-1999 truck thermostat gasket. The 3 bolt is Indmar specific to the custom thermostat housing. You...

Thanks for the advice. Skiers Choice said 6-8 weeks, but I’m may give the DIY route a go. Nothing to lose at this point! Sent from my iPhone...

And on the main water pump impeller, some have good luck - some have not with the lower priced knockoff. Not worth it trying to save a few bucks on...

I would start behind the display. Not sure what they are using for connectors. If they are rj45 type ethernet connectors, the plastic gets weak. I...

Trying the editor app for the first time and it’s going to take me a bit to learn this thing lol. Also tried some floaters and 360’s and I did...

Ouch that sucks man!!

Great pics. We’d love to be on the water but all the lakes around here are flooded and full of debris. Our home lake is 25ft high Sent from my...

call skiers choice and ask them otherwise crack the module open and solder new relays on it. if you don't feel like soldering or not in your...

Try this. ...

use at your own risk but I have used a magic eraser lightly and then polish compound and wax. I emphasize the word lightly.

3M makes some marine products (kit) that will provide a light cut, then a polish. Start light before going to anything heavier.

Any additional updates, thoughts on the thrusters?

Still on the water? Did it no start again?