Search:

Oil pressure switch or coolant switch.

There are 2 each. If 1 goes bad you get stuck in limp mode. Are your gauges reading oil pressure and coolant temp?

The center underfloor tank has a front overflow that goes to the bow bag.
If you do not have a bow bag, then it should be plugged or going to an overflow out of the boat.

Instead - 1 owner Paragon and travel trailer at the lake seems like a better deal.

Shop around. I used to see that puller plate for $50 online.
If you are handy and have a piece of steel you can make one in about 30 minutes.
But yes that is the plate that makes this a 1 hour job.

Correct. Cannot come out through the front. The fuel tank amd cross brace is in the way.

I made my own coupler tool and got grade 8 bolts from tractor supply to use to pull the coupler. There...

The hardest part is getting the coupler off the shaft after taking the 4 bolts out.

Ask away I did this 2 years ago and help another member do this last year.
I went with Glide. 1-1/8 shaft 4"...

It's the upper board rack mounts.
I have the same ones on my S bend tower.
31028
31029

You could use them for side pulls. I had extra tines so I made a rack for long boards and/or skis.

I remember the day I got the balls to ask my dad this exact question.

I had been trailering since 14yr old, operated heavy machinery since 12 and grew up with quads and dirt bikes. My dad wasn't...

Good to hear.
I tightened down everything last season and added a nylock to help.
Tower is strong just wasn't sure if the lateral force would be a problem. The A3 and Pro towers just appear to be...

Looking at one of these options myself but my boat is a little older.

Anyone know if the S-Bend tower is strong enough to pull from the side?
I feel the older boats and towers shake a little more...

My deepest sympathy and condolences for your loss.
I hope Hayden got to live and love life to the fullest, even if it was too short.

Thank you for letting us know. God Bless.

Rope wranglers are also free ballast.

Sewlong - $2500
Wake shade - $899 until May 31st.

Kind of a no brainer. I like the wakshade folds up.

@Ruger did you say you don't fold up your sail with the fabric on? Wondering if that is...

Autowake diagnostic port?

Keep her straight between the banks and enjoy the ride my man. You might no longer be in a wakeboat but keep on enjoying life in whatever other adventures you decide to go on.

Flow 3 is the system that has 2 actuators per surf plate - 1 for up and down, 1 for the end of the plate to fine tune. Assuming your Craz doesn't have Flow 3, so it is not used. I don't believe...

It's a debate for sure. I understand the purpose and the good intentions of an HOA but my experience with them was the bad Larry brought up. Maybe I'm the problem neighbor....lol

Anyway, mine...

^ this is the correct answer

Becareful doing this.

The fuel pump runs to prime the system prior to starting. Since you are pumping and not priming it could throw a code and then to clear it you would need the dealer.
...

Go look. I have already seen it on their used inventory. Dealer demos and such are at big discounts 30% range.

Is this why I can pickup a 2023 23Lsv loaded with 25hrs for the price of a new moomba max?

I heard since covid Bu just isn't the brand they used to be.

HFarr...there is a large plastic cover on the underneath side of the cushion to hide the flip up mechanism. It will contact your wakemaker bags when full. You could make it work if you limited the...

This sucks.

There are so many other rules people don't follow on the lake that do more damage and even cause fatalities, but they are targeting wake boats.

However, it only takes 1% to screw it...

Puller:
Deargooday 660040-1 Impeller Puller Removal for Impellers 2-1/4" to 2-9/16", for Jabsco Pump 50070-0040 & 50070-0200 https://a.co/d/46l7MIP

Impeller:
Johnson Pump - 3001.3621 09-812B-1...

The impeller is $30.
Impeller tool is $50.

Takes 45 minutes from start to finish including the celebration beer and washing your hands.
For $710 I'll fly to you and do it! That is robbery...