I'm having trouble finding 8" empty cans. Can someone point me in the right direction? I was thing (4) Kicker 8" Coax with LEDs.
Thanks!
Printable View
I'm having trouble finding 8" empty cans. Can someone point me in the right direction? I was thing (4) Kicker 8" Coax with LEDs.
Thanks!
Contact Odin @ Earmark Marine. They have an 8" pod that will fit the Kicker KM8. They come in white or black powder coat. Just note, you will need to enlarge the pods opening in order to accommodate the KM8.
http://i181.photobucket.com/albums/x...ps632dd753.jpg
Thanks Mike, how do you feel about 4 of those on a Mondo for Surf/Party cove setup? Originally I wanted a six pack but I think the 8's will be a better fit.Quote:
Originally Posted by MLA
Have you seen the new L7's? Thinking about one in a custom box under the dash paired with the new KXM1200.1
Thats the 2nd boat we've done 2 pair on since the KM8 was released last spring. Finished that setup yesterday. 2 pair driven with dual KM400.4 @ 200W rms to each. Its a very impressive surf/party cove setup. Size sill always trump quantity in RE to sound quality. Doing another 2 pair later this month.
The new Q series was actually unveiled just last week at the CES in Vegas. It has been held close to the vest, so I know much of nothing about the new subs, other than whats printed. The new Q amps look sweat.
Ya I saw that, they look nice. I was thinking of doing....Quote:
Originally Posted by MLA
(4) KM8's on tower
(2) 400.4 for tower
(4) Km6's in stock cabin locations (I think the '15 come stock with KM6's not sure though)
(1) 400.4 for cabin
(2) KM6's in the bow
(1) 400.2 for the bow
(1) L712 under the dash
(1) 1200.1 for sub
(4) ZXMLRC for sub, tower, cabin & bow
Not sure I can fit (5) amps in there though haha. Would I have to upgrade the alternator?
I definitely like that wattage to the tower.
The KM400.4 is going to deliver 50W rms to each of the 4 main cabins. It will easily drive the bow pair as well, with the same wattage. This would get you down to 4 amps, unless there was a reason you wanted to drive the bow pair with 100W to each?
Now, this brings me to another thought. With a 1200W 12" sub, 50W to your in-boats may not be enough to balance the bass. if you can stick with 5 amps, do dual 400.2's. This would be 100W rms to all 6 in-boats and you can even add a 4th pair if you like.
Yes, I do believe the 15's are now coming with the new KM654
Quote:
Originally Posted by MLA
So dual 400.4 for tower & dual 400.2 for in boats plus 1200.1 for sub? Could I still separate the bow speakers with a separate volume control?
Thanks for the help Mike!
Yes sir, still have 4 zones.
Ok cool, I wonder if I should add a third battery or upgrade the alternator?Quote:
Originally Posted by MLA
I doubt you will need to upgrade the alternator. Additional battery Ah will be dependent upon how long you want play while at anchor.
If I did add another would I do 2 for stereo and 1 for boat or vice versa?Quote:
Originally Posted by MLA
Yes, 1 for main cranking and 2 in parallel for the house/stereo bank.
Thanks Mike, would it be best to have 3 matching batteries? Or the stereo be s little heavier duty?Quote:
Originally Posted by MLA
When wiring 2 batteries together, they become 1. Ideally, you would want them both to be the same size, type and age. If this is a new boat, then I would not hesitate to just wire in that 2nd house battery to the existing hose battery. If the boat happens to come with 2 cranking batteries, which is very common for an OEM setup, then I would swap the cranking on the house side, for 2 deep-cycles.
Here's a video showing the new Q series amps TWEEQ system.
http://www.kicker.com/tweeq
The L7 may be available as early as Feb.
DSP is no joke. I have it in my RV for radically improved sound quality for those long drives. All future cars and trucks of mine will be DSP equipped.
DSP may be used very differently in an open boat versus a closed vehicle cabin. However, DSP can be just as valuable in a boat as in a vehicle. Imagine phase correction on multi-pair tower speakers that are staggered on a forward leaning tower or staggered mounting on front and rear tower tubes. Or, DSP can correct the phase between the tower speakers and subwoofer at a focal point just behind the transom.
Earmark Marine and Earmark Car Audio does a ton of DSP. And Wetsounds added DSP to their newest demo boat.
The one cautionary note is that there are many, many complexities related to phase correction other than the distance differential between drivers alone. And there is much more to equalization beyond simply creating a ruler flat response. It's still a job best left to the pros. But there is no doubt that DSP is a game changer.
Hey Mike,Quote:
Originally Posted by MLA
So if the boat comes with (4) 4ohm speakers then I would wire each side in parallel to represent a 2ohm load at the amp? That way all 4 speakers are 100watts each? The 2 bow speakers would be 4ohm as well but just those pair off the other 400.2 amp to show a 4ohm load at 100watts each right?
I think to keep it to (4) amps I'm thinking of doing (2) 800.5s for the tower & do (2) KM10s under the dash & have an extra sub channel for future? The KM8s would still be getting 200watts each right?
Yes, the KXM400.2 would deliver 100W rms x 2 @ 4 ohm, so 100W to each speaker with one pair. 200W rms x 2 @ 2 ohm when a pair is wired in parallel to each chnl. They split the 200 and net 100W.
Two KXM800.4 would drive 2 pair of the KM8 @ 200W rms each when bridged into 3 chnl mode.
In another thread you said this...
Would the two Kicker 800.5 be ok to handle the power of four KM8s & four KM10s?Quote:
Originally Posted by MLA
Ive done it on a number of our Kicker Promo boats, like the one you saw, because I know how the system will be used. Its a lot to ask of any typical amp, but I have confidence in the Kicker product. As the design takes shape Phil White, Kicker's marine guy, is part of the planning.Quote:
Originally Posted by BrettLee3232
With proper install practices, good tuning and battery voltage management, I do not foresee an issue in your plan.
Thanks for all your help mike. Time to order some gear :)Quote:
Originally Posted by MLA
For anyone interested I ended up ordering 8" cans from Krypt. Odin @ Earmark didn't have empty 8" cans anymore. I got them in the mail and they seem good quality. I will be powder coating them Brittany blue soon.
http://www.bulletlines.com/Kicker-KM...Cans-p/209.htm
I will vouch for Odin at Earmark Marine! He is a stand-up guy and if he can help you he certainly will. They are an authorized JL and WS online dealer so for guys in remote locations like myself it's a great alternative to buying local (which isn't) and only a phone call away for any troubleshooting or customer service. I know Brian at Exile get's alot of attention on here and as he should! Great products and service to follow. But there are others and I wanted to mention Earmark and MLA since they don't get the thumbs up that they deserve!
So don't hesitate to go to these 2 as well for anything marine audio.