Activity Stream

I checked the ground from the battery to the block. It was rusted heavily. I backed it out cleaned the threads put some dielectric grease on, and it...

Coil is new Plugs are new or at least good Wires are good Connections all tight Fuses/breakers good nothing tripped Battery ran for 2 weeks...

I am just assuming it's the same problem as last time. No spark getting to the plugs. Will try and figure it out this weekend.

Did you determine the no spark to be coil to distributor, or distributor to plugs? Just curious where the problem is starting.

Checked all connections to the new switch. Will try to trace the battery wire tomorrow. Everything looks good and feels tight. If I ran a new wire,...

Man, that has to be frustrating! Check your switch connection plugs again since you had them apart when you changed the ignition switch out. Maybe...

Never had mine off before, so I am shooting in the dark about what it looks like,but can you spread a thin coat of RTV silicon gasket maker on it? ...

No spark again this morning ran great started like it is injected for two weeks. Today no spark. It sat for two days, so I primed the carb with a...

I just removed the bottom cover, took the gasket and made sure it was clean, lined it back up on the plate and carefully screwed it back down. The...

Having the same issue and wondering how you resolved it. Thanks!

Rotella t4 15w40.

Just sent you what I have via PM.