Results 1 to 10 of 116
Thread: Gunwale Step Pad
-
08-11-2014, 01:04 PM #1
Gunwale Step Pad
Anyone know if these new step pads would fit my rig? Mine is starting show some wear from taking the leap from the dock to the lift and I would like to get something over it. If you know of any suppliers please let me know who to call.14822566993_1c6f6805aa_k.jpg
2013 Mobius LSV
2004 Centurion T5
-
08-11-2014, 02:07 PM #2
Saw those on the Mojo video and was thinking I would like some myself. I recently bought a SeaDek pad that I cut in a couple pieces and put one on port and one on starboard side gunwales, but forward of the rear lockers as that is where we are stepping on and off mainly. Also, one of the tower arms fell down when my wife was putting down the tower and chipped the gelcoat bad, so wanted to cover up the repair I did on that and prevent another chip.
06 Mobius LSV, GIII (now with 1100 in the port locker), perfect pass, wakeplate
Kicker KM10 Sub, dual batteries
-
08-12-2014, 01:36 PM #3
I am thinking about these too.
For me I would need to move my rear pop up cleats. I like the idea of remounting them on the sides. I think this will become a winter upgrade for me.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
09-06-2014, 07:16 PM #4Junior Member
- Join Date
- Aug 2014
- Posts
- 8
I know the nonskid carpet that matches this gunwhale step pad will not fit in the 13' or 14' mojo due the different shape and length of the 15' boat. I called the dealership to find out since the nonskid carpet looks really cool. I did not think to ask about the gunwhale step pad. Good question. It looks really cool as well. Just by looking at it, I would think you could order it and trim to fit if the pad was too long. And If you had to trim it, it should not affect the Moomba lettering, it would just trim some of the design off the end. I may order it, and if it is too long for my 13' MOJO, I will just trim and apply.
'13 MOJO
Exhile:
4 XM9's, 4 SX65-M, 1 XM30.2
Fosgate:
2 10' subs, 1 750-1D amp
GIII ballast with 750 IBS
-
09-06-2014, 09:33 PM #5
You will have to move your pop up cleats to the side of the boat. Good thing the step pad will cover the holes.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
09-08-2014, 10:47 AM #6
Eric, I believe that Seadeck has the pattern from the Roswell boat that will fit the 12's and 13's
http://www.seadek.com/blog/seadek-cu...l-moomba-mojo/-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
09-08-2014, 07:19 PM #7
Jason has the gunwale step pads on his new 2015 LSV.
https://forum.moomba.com/showthread.php?25134-Surf-Wake
So, yes, you should be able to order them and they will fit perfectly. Remember that you still need to move your cleats to the side of the gunwale. Good thing the pad will cover the old holes.Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
09-08-2014, 08:56 PM #8
Will these fit a 2013 LSV??
KRiley
2013 Moomba LSV
Exile xm9s
Exile Amps
Exile sub
-
09-08-2014, 09:03 PM #9
-
09-08-2014, 10:53 PM #10