Results 11 to 20 of 24
Thread: Exile in the 2012 LSV
-
04-29-2014, 01:23 PM #11
Exile in the 2012 LSV
^^women just don't understand!
Looks good keep the updates coming.2008 Supra 21V-Currently For Sale
-
04-29-2014, 03:10 PM #12
Exile in the 2012 LSV
If I'm working on the boat in the driveway and the volume knob goes over 20% Heidi is telling me to turn it down lol
Sent from my iPhoneDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
04-29-2014, 08:34 PM #13Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-21-2014, 03:28 PM #14
Exile in the 2012 LSV
It's taken a while, but I finally got the sub (Xi 12D) and ZLD installed.
I used uniwarking's box design, and it works great. My facade is different since I don't have the hump, but I was able to adapt. I used 3/4" birch for the box and facade. I coated each with 3-4 coats of spray on bed liner.
The box is glued and screwed, then all of the seams are caulked.
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
06-21-2014, 03:30 PM #15
Exile in the 2012 LSV
Here it was when I was positioning it to get it under the helm. The base ends up 7" off of the floor to clear the cluster of stuff coming out of the floor. I had to move the main power wires and attach them close to where the air vent was attached to the wall. I also ended up letting the air vent hang loose. By the time it wraps around the box it doesn't have much slack left in it.
I used legs to help hold the rear of the box up when I was screwing it to the facade, but I then ended up removing them because it wasn't needed, and trying to get each leg cut to the proper length was a pain.Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
06-21-2014, 03:31 PM #16
Exile in the 2012 LSV
Here it is after I had the box screwed to the facade. I was able to reach my arm and head in the box to caulk around that seam also.
I later went back and cut the carpet around the hole to keep an air tight seal. I also put weather stripping around the sub.Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
06-21-2014, 03:32 PM #17
Exile in the 2012 LSV
All done.
And the ZLD
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
06-21-2014, 07:54 PM #18
Looks real nice, but the subwoofer grill is on sideways.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-21-2014, 08:15 PM #19
Exile in the 2012 LSV
Guess it is. I was matching the pattern to the one on the speaker. Maybe I'll change it
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
06-21-2014, 08:37 PM #20