Results 1 to 10 of 22
-
07-19-2013, 07:28 PM #1
Swivel Racks on a Rad A Cage Tower
I'm wondering if anyone has a photo of either Roswell or Monster swivel racks on a rad a cage tower? I'm curious if everything would clear the stock Moomba bimini top when swiveled in. My current set up is how it came from the factory I think.
I've also got the painfull task of needing to pack a wakeboard, surfboard, kneeboard and a waterski all at the same time so I'm trying to figure out what the best and/or cheapest way to do it. I'd like to have everything in the racks if possible.
Cheers,photo (2).jpg2008 Moomba Outback V
2002 Eagle E6 Sabre Jet Boat - Sold
-
07-19-2013, 09:38 PM #2
I have the Roswell swivel racks on my 2010. Yes they will hit the stock bimini when swiveled in and a board in the rack. Empty they will swivel in okay when the bimini it stored for towing. I installed a Monster Tower bimini, a modified install, and mounted it higher up the tower so I could stand up under it and also swivel the racks in even when loaded enough to put a board on/off the rack.
Damn site won't let me upload some photos so use your imagination...Last edited by KSmith; 07-19-2013 at 09:41 PM.
Kraig - 2010 Outback V
-
07-20-2013, 01:51 AM #3
Swivel Racks on a Rad A Cage Tower
I have the Roswell swivel racks and they do not come any where close to the Bimini on my 2011. I can take a pic tomorrow.
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
07-20-2013, 07:02 AM #4
-
05-20-2014, 11:47 AM #5Member
- Join Date
- Feb 2014
- Location
- Martinsville, Indiana
- Posts
- 35
Wanting to find out if anyone has any updates as to swivel racks for the 1 5/8" Rad-A-Cage. I have a new to me 2009 OBV and need to switch to swivel so I can pull onto my cradle lift without hitting boards on the lift cables. That means that I THINK I need racks that mount to the round tubing so I can mount low enough to clear the stock bimini and speakers. I have been searching forums for a week trying to figure this one out. Only thing I have so far is putting a different bimini on, or these... http://www.bulletlines.com/Wakeboard...-Racks-s/2.htm I am looking for any other options. All help is appreciated at this point! Thanks!
First Moomba!
2009 Outback V 325
-
05-20-2014, 04:14 PM #6
-
05-20-2014, 05:38 PM #7
I have 2 swivel racks from Monster, one is still in box, the other is assembled, but never mounted. would make you a killer deal if you want to try them. send me a pm or email and i can get you pics or other details. maybe someone knows if they work with your tower?
19 Mondo
08 LSV, forever loved
-
05-20-2014, 06:29 PM #8
Do they fit on your '08?
2007 LSV
-
05-20-2014, 06:40 PM #9Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Swivel Racks on a Rad A Cage Tower
What size are they? Got any pics? What size are they 2.5?
Sent from my Nexus 5 using TapatalkLast edited by parrothd; 05-20-2014 at 06:43 PM.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-20-2014, 07:46 PM #10
i also need a set of racks....
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)