Search:

I have an '01 mobius and at about 23mph with the factory rear ballast and about 5+ people its a suprisingly nice wake, though kinda narrow. I have a friend with an '07 Malibu V-Ride and with the...

I think he is referring to the fact that in a carbureted or throttle body injection engine the condition of the plugs always look different from the cylinders at the front of the block as apposed to...

I have repainted my entire motor (block, heads, and exhaust manifolds) about 5yrs ago, but it was done with the motor out of the boat. For me i would be afraid of any type of overspray with the...

There is no magic formula for the perfect board size... your best bet is to find a shop that will allow you to demo the boards. Generally there are 3-4 board sizes per model... you would probably...

I have a 2001 Mobius DD, and it too has a 27/28g tank. I get about 4-5hrs of play time per full tank of gas.

Great job... its addicting huh?

If the guy is "3 bills" then give him a beer, put him in the back corner of the boat, load up all your ballast and do some surfing!

Seriously though, big guys always have trouble getting up from a...

Great looking boat, color, tower... everything about it! What motor did you get?

Yup... my bad. (Jr.)

Looks great. And the fact that your riding a little ways back is sign of a solid wave!

Agreed...

i have two .5" molded in fins on each side and one removable .7" center fin on each end (that i leave on).

Im not preaching that everyone should go out and put a 2.5" fin on their...

You can find them at most auto parts shops. Though check to see what you have first, some have a 2 pole and others have a 3 pole. Cost is about $20, most likely 2x that at a dealer.

First id be sure that you do have good oil pressure, if not your fun on the water will be short lived.

If you do have good oil pressure (generally 10psi per 1000 rpm) then a typical "jerry rig" is...

Oh, figured id post this... this is exactly what i have. Could be useful for others and future builds.

http://plumbing.hardwarestore.com/108-603-check-valves/fip-pvc-check-valve-669156.aspx

I guess im the odd-ball here but i always ride with my center fins in place (unless im at a cable park with kickers and sliders). Most boards have molded in fins with optional center fin... My...

wow... bummer. odd that the shaft snapped like that, with minimal damage to the prop (much softer material). Make sure you get the tranny checked out too!

I like pic 3 the best, looks like its curling a little too. The other too look a little foamy. 9.5mph is a bit slow, hows she look at 10.5 or 11mph?

Michigan:
Elizabeth Lake, Waterford (home lake)
Cass Lake, Waterford
Union Lake, West Bloomfield
Orchard Lake, West Bloomfield
Whitmore Lake
Belleville Lake
Higgins Lake, Roscommon...

Thx... i got a great tip from a friend that really helped. (im goofy footed, btw). Basically get up riding switch with the board backwards, its difficult at first because there is no fin on the...

I just started surfing this year, so i have a few months under my belt. But i have been wakeboarding for 10yrs, so surfing is not completely "unfamiliar" to me. I just happened to purchase my own...

Yeah it is a check valve. I took everything apart yesterday and cleaned it out. The valve was ok, i think maybe a zebra mussel was limiting the flow of the pump and it couldnt create enough...

Thanks... But what i have looks nothing like that, there are no electrical lines to it. Ill try post a pic this evening...

Thanks for the info guys. I ended up getting the Triple X composite 58" board. Couldnt pass up the price. I only have one ride on it and so far i really like it. Though i did swap out the stock...

Hey fellas, i have a 2001 Mobius, and the stock rear bag is not filling anymore, though the pump still seems to be working (rule 2000). I disconnected the fill line from the bag and turned on the...

Thanks for the offer... but im on the other side of the state, Waterford area. Thanks for all the tips though... hoping to buy something this weekend!