Originally Posted by
dusty2221
Thanks cab, the reason I was planning on running a dedicated wire to each + and - on the speakers is because I have 100ft of 12g 4 conductor speaker wire with an outer jacket covering all 4 lines. So, my plan, the wire has red, green, black, and white, was to just make one run which would include all the wires for both speakers. At the speaker, I planned to hook the red and black to one speaker, then the green and white to the other + and -, and back at the amp wire the two positives together and same with the grounds. So it still gets a 2ohm presence at the amp, but each speaker has it's "own" line all the way to the amp. make sense?