Well, thanks for pointing me in the direction for the access hole, I already had it covered with junk and didn’t even realize it was there.
The vent or overflow line wasn’t hooked up to the bag...simple fix!
Attachment 28618
Printable View
Well, thanks for pointing me in the direction for the access hole, I already had it covered with junk and didn’t even realize it was there.
The vent or overflow line wasn’t hooked up to the bag...simple fix!
Attachment 28618
Anyone know how to bleed the air out of the front Makai bag? I see the air vents on the two back bags. By the way they had a lot of air in them. I purged them filled them tight again, then next time I emptied and refilled, the air was right back again! Any thoughts?
Sent from my moto z4 using Tapatalk
Here is a video of me venting the air out of one of my rear bags. This is after the pumps filled it, shut off, and I rand them some more until water came out of the overflow. I was able to fill it more after venting too. Built like I said, when I drained them and filled again, air was right back in there. Also when I drain them, there is always some water left in the bottom. Probably 4" worth. I ran the pumps more, but it just won't suck it all out.
https://youtu.be/JvPQ9EbPzy0
Sent from my moto z4 using Tapatalk