DAMN OP! You must have read my mind
I was just about to post about this issue. Looks like I will grab some L-channel tonight.
Thanks all.
Printable View
DAMN OP! You must have read my mind
I was just about to post about this issue. Looks like I will grab some L-channel tonight.
Thanks all.
https://uploads.tapatalk-cdn.com/201...2552ca29b7.jpg
It is hard to distinguish as the u channel and L are both the same material. This has worked for me.
Sent from my iPhone using Tapatalk
I have been having this same problem on my Max, my dealer talked with sc and they do have an aluminum channel as a replacement. Parts are hopefully getting in today
My Max came with aluminum channel and not plastic.Quote:
Originally Posted by DL Max
Sent from my iPhone using Tapatalk
That's because they must have known how YOU like to weight things Russ!!!!!!!!!!!Quote:
Originally Posted by Boonejeepin
It’s only a few extra lbs here and there. :)Quote:
Originally Posted by trayson
Sent from my iPhone using Tapatalk
My 12 dividers are bowing From the 1100’s. Wake makers sell braces to help. I plan on addressing on the off season
Sent from my iPhone using Tapatalk
Screws popped through my plastic channel a month ago. I added washers the width of the channel to hopefully hold through the season. So far so good...
This is interesting. I just checked my 2018 Craz tonight and mine are already aluminum. They must have know this was a problem and fixed it at some point in 18.
Sent from my iPhone using Tapatalk
For all you guys wanting to brace the panels, there’s a cheaper way to do it than wake makers.Quote:
Originally Posted by Ironcross25
Go to tractor supply, Home Depot, etc. find some 1/8” steel L channel. They usually sell it in 1-2’ sticks. Grab some #8 machine screws, washers and nuts. Drill a couple holes in the channel, then through the panels when it’s mocked up. Slide a screw through and nut on there and roll with it. Can be done for less than $30 and takes about 30min...