Prop shaft thread pitch/size

[Blueliner]

I am wondering if anyone knows what the size and pitch of the thread is on my boat. Have to remove and repair my prop cause I hit a gravelly sandbar last night (low water conditions) its dinged up a fair bit.

There is no source around here that I can get a (harmonic or C) puller quick but I can get the guys in the machine shop at work to make a harmonic puller quick if they have a tap. What is the material of the puller?

There is also a variety of bearing/gear pullers with two claws on them at work. I could try them as well I guess.

Thanks folks

Regards
Blueliner

[kaneboats]

You don't need the nut size or thread. Just have them make you one like this out of a C clamp:

https://www.wakemakers.com/acme-c-clamp-prop-puller.html?gclid=COfv1O_R-M4CFYU0aQodlH0HKg

This chart might help with the nut for your shaft:

http://www.propshopinc.com/Nut-Kit-Set-for-Inboard-Propellers-p30.html

[VA LSV]

Thread size is 3/4 - 10.