View Full Version : Water Removal in V-Drive

05-09-2013, 09:37 PM
What is the best way to remove and flush the oil in the V-Drive if it has water in it? I know how the water got in there just gotta get rid of all that milky oil in there and was wondering what was the best way.

Thanks Matt

05-09-2013, 09:38 PM
Suck it out with a pela or equivalent vacuum pump.

beat taco
05-10-2013, 01:15 AM
There's a drain plug on the bottom, drain and refill. I used a pan with only about a 1" lip so I could slide it under the unit. Plus some disposable rags. Mine was full of water on pre-purchase inspection and I drained and filled it just so I could do a test drive. I changed it after every use for the first four or five uses, it would get cleaner each time, and it's been perfect ever since.

05-10-2013, 02:33 PM
might have to drain it and fill it once or twice to make sure its all out