Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24
  1. #11
    Join Date
    Feb 2012
    Location
    South Jordan, Utah
    Posts
    255

    Default Blue Sea add a battery help.

    Al,

    I got it figured out. I had forgotten to put the jumper from battery 1 to battery 2. Once I added that everything worked great. Thanks for checking back.
    Kurt
    2019 Supra SL 550
    2016 Mojo - Sold
    2006 Mobius LSV -Sold

  2. #12
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,017

    Default

    Good to hear. I kinda felt responsible since you were following my diagram
    Al

    2006 Mobius LSV

  3. #13
    Join Date
    Mar 2012
    Location
    South Carolina
    Posts
    812

    Default Blue Sea add a battery help.

    Quote Originally Posted by MLA View Post
    Which switch do you have, the traditional dual battery switch or the dual-circuit plus switch? With there be an ACR? Is an on-board charger part of the plan as well?
    The model # is 9100e? Ill have to take a picture tomorrow. No clue what am ACR is, and no there will not be an inboard charger at this time.

    Thanks for replying to my pm Al.

    I have to figure out a parts list other than the switch and some wire.

    I may just end up paying to have this done when I get down to SC, too much going on with the move.
    2008 Supra 21V-Currently For Sale

  4. #14
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Quote Originally Posted by Cigars n scotch View Post
    The model # is 9100e? Ill have to take a picture tomorrow. No clue what am ACR is, and no there will not be an inboard charger at this time.

    Thanks for replying to my pm Al.

    I have to figure out a parts list other than the switch and some wire.

    I may just end up paying to have this done when I get down to SC, too much going on with the move.
    Where in SC are you moving to?

  5. #15
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Quote Originally Posted by Cigars n scotch View Post
    The model # is 9100e? Ill have to take a picture tomorrow. No clue what am ACR is, and no there will not be an inboard charger at this time.

    Thanks for replying to my pm Al.

    I have to figure out a parts list other than the switch and some wire.

    I may just end up paying to have this done when I get down to SC, too much going on with the move.
    The 9001E is a traditional OFF/1/BOTH/2 switch. an ACR is an Auto Combining Relay as illustrated in the diagrams above.

  6. #16
    Join Date
    Mar 2012
    Location
    South Carolina
    Posts
    812

    Default Blue Sea add a battery help.

    Quote Originally Posted by MLA View Post
    Where in SC are you moving to?
    Most likely settling in Fort Mill by Lake Wylie. We're renting in Charlotte for 3 mos while we look for a house.
    2008 Supra 21V-Currently For Sale

  7. #17
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Quote Originally Posted by Cigars n scotch View Post
    Most likely settling in Fort Mill by Lake Wylie. We're renting in Charlotte for 3 mos while we look for a house.
    Wylie is my home lake. Im just over the SC state line in NC and 15 minutes from the north end of the lake and 30 from the south end. Welcome to the area. 9 months of boating for the average and year round for the hard core.

  8. #18
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default Blue Sea add a battery help.

    Quote Originally Posted by Cigars n scotch View Post
    We're renting in Charlotte for 3 mos while we look for a house.
    Good call and good luck with the move!

  9. #19
    Join Date
    Jun 2013
    Location
    rockwood tn
    Posts
    27

    Default

    I have the 13 mojo2.5 and was wondering if I can run the SI wire to the starter or does it have to be wired to the key switch if anyone can help me out that would be great thanks!!

  10. #20
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Riddle,

    The SI terminal on the Blue Sea 7610 ACR needs to see battery voltage ONLY when the start is engaged. Exactly where you draw this from is not as important. But in all honestly, its a circuit thats rarely needed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •