Results 41 to 50 of 50
Thread: Swim Platform Bracket Fix
-
01-27-2011, 12:38 PM #41
Kane they are adding the new Moomba logo seadeck for the 2011s. I saw it at the show and i like it but i dont think its as soft as the current one we have.
I will wait till we get it and if we like then cool, if not ill order a new Teak Foux sea deck and install that. Just have to wait and see.
The other nice thing is it sounds like SC doesnt want my damaged swim deck so i get that one back and i plan to make a nice hanging wall art peace out of in the garage.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
01-27-2011, 01:35 PM #42
That's great that SC is taking care of you Mike. Hopefully they get the swim platform built and sent to you quickly, or at least by the date they say it should be to you.
Nate
-
01-27-2011, 02:46 PM #43
Well they are getting smarter in the estimates AWS said SC said sometime before April LOL.
But the good thing is i can go pick up my current swim deck and use it still so im not at a loss for boating if the optunity comes up.
Unlike your situation you got stuck at the mercy of SC and repairs.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
01-27-2011, 02:56 PM #44
You forgot to ad the insurance company in that mix.
I wouldn't be surprised if SC still told AWS 2-3 weeks, but based on what happened with my boat AWS is telling you 2-3 months. Always much better to give a longer estimate then a short one. Which reminds me I need to check on my cushion. I think it is in, but with the boat shows going on Matt has been a little busy. Plus my boat is still at Exile.
Cary is good at fiberglass repair, so your boat is in good hands there. I am still amazed at the quality of work on my boat.Nate
-
09-30-2015, 07:35 PM #45Junior Member
- Join Date
- Sep 2015
- Posts
- 28
Swim Platform Bracket Fix
So today after dragging my son around the lake surfing for an hour, he hops on the platform and one side was off the bracket. The two screws holding the bracket to I think a different bracket on bottom of the platform bent and broke. I can see the screws stuck in the bracket on the boat, busted ends pointed toward the sky. I was able to wiggle the platform back on the bracket attached to the boat, where it was secure for the trip back in, but I can just pull it off now.
I was able to get back in without the whole thing falling apart, so minor victory. I'm guessing I need to cut the screws out. Anyone know what screw sizes, bolts etc I will need? This is for a 2012 MOJO.
My platform has been rattling, it must have sheered off when I hit some rollers surfing.
-
09-30-2015, 07:54 PM #46
My 13 mojo had all these problems, seriously I would look into upgrading to the stainless steel mounting they went to in 14. I think I was one of the first to get it done due to all the issuers I had. It's well worth the cost to upgrade. Brackets on the deck are upgraded and the mounting brackets to the boat are almost an exact match for bolting on the transom. 1-2 hours labor for a shop to mount everything
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
09-30-2015, 08:20 PM #47Junior Member
- Join Date
- Sep 2015
- Posts
- 28
-
09-30-2015, 10:52 PM #48Senior Member
- Join Date
- May 2014
- Location
- Hoover, Al
- Posts
- 588
-
10-01-2015, 08:19 AM #49
Swim Platform Bracket Fix
Ditto... Great upgrade... No more wobbling swim deck and no worries about it ending up on the bottom of the lake!
Sent from my iPhone using Tapatalk2022 Moomba Mojo
2013 Moomba Mojo 2.5 (sold)
Tow - 2019 Ford F150 Ecoboost
-
10-01-2015, 11:41 AM #50Senior Member
- Join Date
- Oct 2013
- Location
- Ft. Collins, CO
- Posts
- 688
The good news is that the swim platform will float. I was surprised based on its weight but after thinking about it, it makes sense since it is a wood core. The FAE, however will not float and I dodged a huge bullet there. I think that my FAE was actually holding my deck on but it was working itself loose...
2007 Mobius LSV
1989 Sanger Skier DX - sold