Results 31 to 40 of 47
Thread: Ballast Upgrade
-
02-21-2011, 10:19 PM #31
I saw this at wakemakers.. may be able to install it in the portside storage between the rear locker and the cooler....?
http://www.wakemakers.com/fly-high-d...-manifold.html
-
02-21-2011, 11:09 PM #32
or cheaper and smaller yet...
http://www.wholesalemarine.com/p/ITT...0/Y+Valve.html
-
02-21-2011, 11:48 PM #33
-
02-22-2011, 09:58 AM #34
i know what your saying. a simple inline straight threw valve at each bag (or somewhere after the a Y) would acomplish that.
-
02-22-2011, 03:34 PM #35
are you going to try just the y fittings first? or are you putting on the valves? I'm thinking that once the ski locker fills the water is going to divert to the bow sac... I am tempted to put in some valves but I would like to see how it works with just the y fittings 1st.
I was at home depot today and looked at building a 2 outlet manifold with pvc that had 2 valves.. It would be a little on the big side but you would be able to independently control the flow to each sac... it would cost about 25 dollars
-
02-22-2011, 07:24 PM #36
to be honest my lazyness to get out of the drivers seat is still contimplating still buying the wakemakers reversable add a pump kit...
-
02-22-2011, 08:22 PM #37
-
02-23-2011, 12:12 AM #38
Lots of great stuff here, I really think i'm going to add the additional pump and 4th switch.....I'm lazy as well
Rob Snyder...no not the actor!2011 Celestial Blue/Black Accent Moomba Mobius LSV, 340HP
-
02-23-2011, 09:15 AM #39
-
02-23-2011, 11:19 AM #40
to be honest i havent researched any past looking up the kit online. havent even looked in the boat, only had it a week