Results 11 to 20 of 36
-
11-30-2012, 05:08 PM #11
Well I'm actually thinking of leaving all the mounting stuff as is and having them mill off the top part and reform it. Possibly even get it rounded off. Nothing's going to happen until after the holidays at the earliest though.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
12-01-2012, 11:14 AM #12
That would be the easiest because of the way it tapers. The taper would be too low and it would not sit in the mount correctly anymore.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
04-26-2013, 01:09 PM #13
Dropped off at a machine shop today - mine is solid and heavy. They are going to machine it off from the top down and regroove it for a rope, keep the existing bolt holes. Also fixing a board rack that had a disagreement with the with the gate when I was backing in a while ago...
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-26-2013, 04:06 PM #14
-
04-26-2013, 04:31 PM #15
About 6-7" is coming off the top. It will only rise up above the sundeck a few inches and then have the top smoothed over. So instead of a shin breaker it will be only be a toe breaker now.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-26-2013, 05:33 PM #16
Make sure to get some pictures and dimensions I am really interested!
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
04-26-2013, 06:11 PM #17
-
04-26-2013, 07:22 PM #18
-
05-28-2013, 10:32 AM #19
What ever happened with this Berg.
I don't think that you would have a problem with the rope because of bow rise.Last edited by New Guy; 05-28-2013 at 10:36 AM.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-28-2013, 11:02 AM #20
bow rise would be present in towing a tube, but with a waterski, your boat is typically planed out at 32-36mph. with a skier that cuts hard and can touch shoulder, would the rope now drop far enough to catch the sunpad or rear corner of the boat, or possibly just drag acorss the sunpad on the edges?
'06 Supra Launch 20SSV-gone but never forgotten